AFX MOTORSPORTS DEF056 Front Bumper Instruction Manual
- June 11, 2024
- AFX MOTORSPORTS
Table of Contents
AFX MOTORSPORTS DEF056 Front Bumper
Product Information
Front Bumper for Can Am Maverick Sport
This product is a front bumper designed for off-road use only. It comes
with hardware including (4x) 1/4 x 2 bolts and nuts and (8x) flat washers. The
installation requires an Allen key and a combination wrench, which are not
included in the package. The liability statement should be read and understood
before installation.
Product Usage Instructions: Front Bumper Installation
- Place the bumper over the front tubes of the Can Am Maverick Sport, aligning the hardware according to the image provided in the manual.
- Use four 1/4 x 2 screws with nut and washer to hold the bumper in place, but do not tighten them yet.
- Align the bumper as straight as possible and tighten all the screws using the Allen key and combination wrench.
- Once all screws are tightened, the installation is complete.
If you have any questions or concerns, please contact info@afxmotorsports.com.
WHAT’S INCLUDE
Pieces included:
Hardware:
- (4x) 1/4 x 2” Bolts and nuts.
- (8x) Flat washe
Tool needed:
- Allen Key.
- Combination Wrench.
INSTALLATION INSTRUCTION
- Place the bumper over the front tubes, aligning the hardware (as it is shown in the image).
- Use four 1/4 x 2” screws with nut and washer (as it is shown in the image)(do no tighten yet).
- Align the Bumper as straight as possible and tighten all the screws.
Now you have completed the installation!.
Liability Statement
AF1 Motorsports products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by AF1 Motorsports and is not recommended. AF1 Motorsports products could interfere with other aftermarket accessories. If user has aftermarket products on machine, contact AF1 Motorsports to verify that they will work together. Although AF1 Motorsports has thousands of satisfied customers, user should be aware that installing bumpers, rock sliders, spare tire carriers, etc. will change the ride of machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect user from severe injury or death. AF1 Motorsports urges operators and occupants to wear a helmet and appropriate riding gear at all times. By purchasing and installing AF1 Motorsports products, user agrees that should damages occur, AF1 Motorsports will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. AF1 Motorsports, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from AF1 Motorsports. The total liability of seller to user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim. AF1 Motorsports will warranty only parts provided by AF1 Motorsports. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by AF1 Motorsports. AF1 Motorsports parts and products are not warrantied if item was not installed properly, misused, or modified.
For technical support , please write us to:
info@afxmotorsports.com or call us at:
Ph. 956-242-6521
www.afxmotorsports.com
4610 Modern Lane, Laredo, TX 78041
Ph. 956-242-6521
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>