AFX MOTORSPORTS SKI066-A Rock Slider Instruction Manual

: June 11, 2024
: AFX MOTORSPORTS

Table of Contents

SKI066-A Rock Slider
HOW TO INSTALL
Liability Statement
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

SKI066-A Rock Slider
Instruction Manual

ROCK SLIDER
CANAM MAVERICK
1000 4 SEATERS
SKI066

SKI066-A Rock Slider

THUNK YOU!
FOR PURCHASING AT AFX MOTORSPORTS

HOW TO INSTALL

Pieces included: AFX MOTORSPORTS SKI066-A Rock Slider - fig
1

Hardware:

(36x) 3/16 rivet
(36x) Flat Washer
(2x) 6mm x 50 mm screws
(2x) Flat Washer

Tools needed (Not included):

3/4” Wrench.
7/32” Allen Key.
9/16” or 14 mm Combination Wrench.

Liability Statement

AF1 Motorsports products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by AF1 Motorsports and is not recommended. AF1 Motorsports products could interfere with other aftermarket accessories. If user has aftermarket products on machine, contact AF1 Motorsports to verify that they will work together. Although AF1 Motorsports has thousands of satisfied customers, user should be aware that installing bumpers, rock sliders, spare tire carriers, etc. will change the ride of machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect user from severe injury or death. AF1 Motorsports urges operators and occupants to wear a helmet and appropriate riding gear at all times. By purchasing and installing AF1 Motorsports products, user agrees that should damages occur, AF1 Motorsports will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. AF1 Motorsports, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from AF1 Motorsports. The total liability of seller to user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim. AF1 Motorsports will warranty only parts provided by AF1 Motorsports. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by AF1 Motorsports. AF1 Motorsports parts and products are not warrantied if item was not installed properly, misused, or modified.

Attach the front rock slider pilot to the vehicle on the driver’s side with the original screws, as shown in image 1, then use the 3/16 rivet and flat washers to attach them from the bottom as shown in image 2.
Then attach the front rock slider copilot to the vehicle on the passenger side with the original screws, as shown in image 1, then use the 3/16 rivet and flat washers to join them from the bottom as shown in image 2.
Use the 6mm x 50mm screws and the flat washer (included in the package) to screw them into the hole in the back rock slidercopilot. (As shown in the picture). Repeat te process whit the front rock slider pilot.
Use the 3/16 rivets and 3/16 flat washers (provided in the package) to attach the back rock sliders to the bottom of the vehicle (as shown in the image).