AFX MOTORSPORTS PRO054 Rock Slider Polaris PRO XP 4 Seater Instruction Manual

June 11, 2024
AFX MOTORSPORTS

AFX MOTORSPORTS PRO054 Rock Slider Polaris PRO XP 4 Seater

AFX-MOTORSPORTS-PRO054-Rock-Slider-Polaris-PRO-XP-4-Seater-
PRO

Product Information

The product is a set of Rock Sliders designed for off-road use only. It is specifically designed for Polaris Pro XP 4 seater models from 2019 to 2021. The package includes one right Rock Slider (co-pilot) and one left Rock Slider (pilot). The hardware included in the package consists of 8x 3/8 x 4 screws, 8x end caps, 8x wedge anchor A, and 8x wedge anchor B. The product manual provides installation instructions that guide users through the installation process.

Product Usage Instructions

  1. Pass the 3/8 bolt through the rock slider and the wedge anchor.
  2. Loosely thread the bolt onto the wedge anchor and repeat for the remaining mounting holes in the Rock Slider.
  3. Align the anchor assemblies with the 4 mounting holes in the vehicle chassis.
  4. Using a 3/4 combination wrench, press inward on the rock slider and tighten the bolts to secure the rock slider ensuring each anchor assembly is fully seated.
  5. Repeat steps 1-4 for the opposite side.
  6. Place the end caps over the mounting holes of the Rock Slider.
  7. The installation is now complete.

Note: The product is for off-road use only. The manufacturer is not liable for any damage or injury caused by misuse or improper installation of this product. For any queries, contact info@afxmotorsports.com.

WHAT’S INCLUDE

Pieces included:

AFX-MOTORSPORTS-PRO054-Rock-Slider-Polaris-PRO-XP-4-Seater-
\(1\)

Hardware:

  • (8x) 3/8” x 4” Scew
  • (8x) End Caps

Tool needed:

  • 3/4” Combination Wrench

INSTALLATION INSTRUCTION

  1. Pass the 3/8” bolt through the rock slider and the wedge anchor.AFX-MOTORSPORTS-PRO054-Rock-Slider-Polaris-PRO-XP-4-Seater- \(3\)
    loosley thread the bolt onto the wedge anchor and repeat for the remaining mounting holes in the Rock Slider.

  2. Align the anchor assemblies with the 4 mounting holes in the vehicle chasis.AFX-MOTORSPORTS-PRO054-Rock-Slider-Polaris-PRO-XP-4-Seater- \(4\)

  3. Press inward on the rock slider and tightening the bolts to secure the rock slider ensuring each anchor assambly is fully seated.

  4. Place the end caps over the mounting holes of the Rock Slider.AFX-MOTORSPORTS-PRO054-Rock-Slider-Polaris-PRO-XP-4-Seater- \(6\)

  5. Repeat the steps for the opposite side.

Now you have completed the installation.

Liability Statement

AF1 Motorsports products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by AF1 Motorsports and is not recommended. AF1 Motorsports products could interfere with other aftermarket accessories. If user has aftermarket products on machine, contact AF1 Motorsports to verify that they will work together. Although AF1 Motorsports has thousands of satisfied customers, user should be aware that installing bumpers, rock sliders, spare tire carriers, etc. will change the ride of machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect user from severe injury or death. AF1 Motorsports urges operators and occupants to wear a helmet and appropriate riding gear at all times. By purchasing and installing AF1 Motorsports products, user agrees that should damages occur, AF1 Motorsports will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. AF1 Motorsports, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from AF1 Motorsports. The total liability of seller to user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim. AF1 Motorsports will warranty only parts provided by AF1 Motorsports. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by AF1 Motorsports. AF1 Motorsports parts and products are not warrantied if item was not installed properly, misused, or modified.

For technical support , please write us to: info@afxmotorsports.com or call us at:
Ph. 956-242-6521

www.afxmotorsports.com
4610 Modern Lane, Laredo, TX 78041
Ph. 956-242-6521

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

AFX MOTORSPORTS User Manuals

Related Manuals