AFX MOTORSPORTS SKI126-C Trailing A Arm Guard Instruction Manual

AFX MOTORSPORTS SKI126-C Trailing A-Arm Guard

Product Information

Trailing A-Arm Guards
The Trailing A-Arm Guards are an off-road product designed for use with the Polaris RZR Turbo S 2-4 Seater. The package includes (1x) Pilot Trailing A-Arm guard and (1x) Co-Pilot Trailing A-Arm guard, as well as hardware: (2x) Screws 1/4 x 2 1/2, (2x) Nuts 1/4 x 3, and (4x) Nuts 1/4. An Allen Key and Combination Wrench are also included. Please note that this product is for off-road use only.

Product Usage Instructions

1. Remove the original rear axle bolt, which is shown in the image. Do not remove the screw from the shock absorber.
2. Place the rear suspension on the axle of the vehicle, where the top perforation of the part matches the perforation of the screw that was removed as shown in the picture.
3. Insert the original screw into the top hole and two 3 1/4 x 2 1/2and1/4 x 3 screws in the holes of the rear suspension tightening with 1/4 nuts. Screws in the inward direction as shown in the image.
4. Repeat the process with the left suspension.

Please refer to the Trailing A-Arm Guards Installation Manual for further information. For any questions or concerns, please contact info@afxmotorsports.com.

Liability Statement: Use of this product is at your own risk. AFX Motorsports is not responsible for any damages or injuries that may occur as a result of using this product.

HOW TO INSTALL

pieces included:

• (1x) Pilot Trailing A-Arm guard
• (1x) Co-Pilot Trailing A-Arm guard

Hardware

• (2x) Screws 1/4” x 2 1/2”
• (2x) Nuts 1/4” x 3”
• (4x) Nuts 1/4”

Tools needed (Not Included):

• Allen Key.
• Combination Wrench.

INSTALLATION

1. Removed the original rear axle bolt, which is shown in the image.
   • Do not remove the screw from the shock absorber
2. Place the rear suspension on the axle of the vehicle, where the top perforation of the part matches the perforation of the screw that was removed as shown in the picture.
3. Insert the original screw into the top hole and two 1/4 x 2 1/2” and 1/4 x 3” screws in the holes of the rear suspension tightening with 1/4 ”nuts.
   • Screws in the inward direction as shown in the image
4. Repeat the process with the left suspension and you will have finished installing your suspensions.

Liability Statement

AFX Motorsports products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by AFX Motorsports and is not recommended. AFX Motorsports products could interfere with other aftermarket accessories. If user has aftermarket products on machine, contact AFX Motorsports to verify that they will work together. Although AFX Motorsports has thousands of satisfied customers, user should be aware that installing bumpers, rock sliders, spare tire carriers, etc. will change the ride of machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect user from severe injury or death. AFX Motorsports urges operators and occupants to wear a helmet and appropriate riding gear at all times. By purchasing and installing AFX Motorsports products, user agrees that should damages occur, AFX Motorsports will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. AFX Motorsports, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from AFX Motorsports. The total liability of seller to user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim. AFX Motorsports will warranty only parts provided by AFX Motorsports. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by AFX Motorsports. AFX Motorsports parts and products are not warrantied if item was not installed properly, misused, or modified.

For technical support, please write us to: info@afxmotorsports.com or call us at:
Ph. 956-242-6521

HAVE FUN AND A SAFE RIDE!

• www.afxmotorsports.com
• 4610 Modern Lane, Laredo, TX 78041 Ph. 956-242-6521

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>