AFX MOTORSPORTS SKI128-C Trailing Arm Guards Instruction Manual
- June 11, 2024
- AFX MOTORSPORTS
Table of Contents
AFX MOTORSPORTS SKI128-C Trailing Arm Guards
This is a set of trailing arm guards designed for off-road use only. It is specifically made for the Polaris RZR XP Pro 2019-2021 model (SKI128-C). The package includes four trailing arm guards: two internal left and right guards, and two external left and right guards. The installation process requires the removal of the original rear axle bolt.
WHAT’S INCLUDE
Pieces included:
Hardware:
- (2x) 1/4” x 2 1/2” Screw
- (2x) 1/4” Security Lock
- (4x) 1/4” Washer
Tool needed:
- Allen Key
- Combination Wrench
INSTALLATION INSTRUCTION
- Removed the original rear axle bolt.
- Place the rear suspension on the axle of the vehicle where the top perforation of the part matches the perforation of the screw that was removed (as show in the pictures).
- Insert the original screw into the top hole and one 1/4” x 2 1/2” screws in the perforations of the rear suspension tightening with double washers and one nut of 1/4”. Screws in the inward direction as shown in the image
- Repeat the proccess with the other suspension and you will have finish installing your suspensions.
Now you have completed the installation.
Liability Statement
AF1 Motorsports products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by AF1 Motorsports and is not recommended. AF1 Motorsports products could interfere with other aftermarket accessories. If user has aftermarket products on machine, contact AF1 Motorsports to verify that they will work together. Although AF1 Motorsports has thousands of satisfied customers, user should be aware that installing bumpers, rock sliders, spare tire carriers, etc. will change the ride of machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect user from severe injury or death. AF1 Motorsports urges operators and occupants to wear a helmet and appropriate riding gear at all times. By purchasing and installing AF1 Motorsports products, user agrees that should damages occur, AF1 Motorsports will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. AF1 Motorsports, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from AF1 Motorsports. The total liability of seller to user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim. AF1 Motorsports will warranty only parts provided by AF1 Motorsports. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by AF1 Motorsports. AF1 Motorsports parts and products are not warrantied if item was not installed properly, misused, or modified.
For technical support , please write us to:
info@afxmotorsports.com or call us at:
Ph. 956-242-6521
www.afxmotorsports.com
4610 Modern Lane, Laredo, TX 78041
Ph. 956-242-6521
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>