AFX MOTORSPORTS POR043 Spare Tire Carrier Instruction Manual

: June 11, 2024
: AFX MOTORSPORTS

Table of Contents

HOW TO INSTALL
- Pieces included
- Tools needed (Not Included)
Customer Service
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

AFX MOTORSPORTS POR043 Spare Tire Carrier

THANK YOU !

FOR PURCHASING AT AFX MOTORSPORTS

SPARE TIRE CARRIER FOR POLARIS PRO XP 2020-2021

HOW TO INSTALL

Pieces included

(1x) Spare Tire Carrier
(2x) Male clamp
2x) Female Clamp
(2x) Hydraulic piston
(1x) Support bracket
(1x) Left Lock
(1x) Right Lcok

(12x) 3/8” x 1” Bolt
(12x) 3/8” Lock nut
(10x) 3/8” Flat Washer
(2x) 1/4” Flat washer
(2x) 6mm x 50mm

(8x) 1/4” x 1-1/2” Bolt
(8x) 1/4” Lock Nut
(4x) 5/16” x 1” Bolt
(3x) 10M-1.25 Lug Nut

Tools needed (Not Included)

Screwdriver
Torx Key Set (T30, T25, T40)
5/32” Allen Key.
7/16” Combination Wrench.

*During the installation do not fully tighten the bolts and nut. Tighten all the hardware until the and of the installation.

Liability Statement

AF1 Motorsports products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by AF1 Motorsports and is not recommended. AF1 Motorsports products could interfere with other aftermarket accessories. If user has aftermarket products on machine, contact AF1 Motorsports to verify that they will work together. Although AF1 Motorsports has thousands of satisfied customers, user should be aware that installing bumpers, rock sliders, spare tire carriers, etc. will change the ride of machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect user from severe injury or death. AF1 Motorsports urges operators and occupants to wear a helmet and appropriate riding gear at all times. By purchasing and installing AF1 Motorsports products, user agrees that should damages occur, AF1 Motorsports will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. AF1 Motorsports, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from AF1 Motorsports. The total liability of seller to user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim. AF1 Motorsports will warranty only parts provided by AF1 Motorsports. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by AF1 Motorsports. AF1 Motorsports parts and products are not warrantied if item was not installed properly, misused, or modified.

*During the installation do not fully tighten the bolts and nut. Tighten all the hardware until the and of the installation.

Remove both of the screws placed in the center with a torx key L.
If your vehicle has a 5 point seat belt, remove the screws and bolts to attach the soport bracket.
Attach the Support Bracket to your vehicle.
Use 2 bolts of 3/8” x 1” with plain washer and 2 lock nuts to attach the outside of the support bracket to the vehicle.
To secure the center of the bracket use two 6mm x 50mm bolts.
Join the support bracket to the main grill. Use two bolts with 4 lock nuts (3/8”x1”) Do not tighten the bolts completely.
Attach the hydraulic pistons to the support bracket and the Main Grill. Use two bolts with lock nuts (3/8”x1”). Do not tighten the bolts completely.

Lift the Main Grill to secure the hydraulic pistons to the main grill. Use two bolts with lock nuts (3/8”x1”) Do not tighten the bolts completely.
Attach the Left and Right Lock to the main grill. Use 2 bolts and lock nuts for each lock (1/4” x 1-1/2”)
Place the spare tire carrier on the center of the main grill. Secure the spare tire carrier with 4 bolts and lock nuts (3/8” x 1”)
Place the female clamp behind the mounting bracket of the roll cage. Align both holes of the clamps and secure the male clamp, fastening wih (2x) 5/16” x 1“ bolts.
Tighten all the hardware.
Place the Spare tire over the spare tire carrier and secure with 3 wheel lug nuts.

Customer Service

For technical support, please write us to:
info@afxmotorsports.com or call us at:
Ph. 956-242-6521
4610 Modern Lane, Laredo, TX 78041 Ph. 956-242-6521
THIS PRODUCT IS FOR OFF ROAD USE ONLY

Documents / Resources

| AFX MOTORSPORTS POR043 Spare Tire Carrier [pdf] Instruction Manual
POR043 Spare Tire Carrier, POR043, Spare Tire Carrier, Tire Carrier, Carrier
---|---