AFX MOTORSPORTS SKI124-C Tralling Arm Guards Installation Guide
- June 11, 2024
- AFX MOTORSPORTS
Table of Contents
INSTALLATION MANUAL
TRALLING ARM GUARDS
POLARIS RZR PR0 R 2022
SKI124-C
SKI124-C Tralling Arm Guards
THANK YOU!
FOR PURCHASING AT AFX MOTORSPORTS
TRALLING ARM GUARDS
FOR POLARIS RZR PRO R 2022
HOW TO INSTALL
Pieces included:
Hardware:
(2x) 1/4” x 3” Button screw
(2x) 5/16” Nut
(2x) 5/16” x 3-1/2” Carriage Screws
(2x) 1/4” Security Nut
(2x) 5/16” Pressure Washer
Tools needed (Not included):
Allen Key.
Combination Wrench.
Liability Statement
AFX Motorsports products are designed to best fit user’s ATV/UTV under
stock conditions. Adding, modifying, or fabricating any factory or aftermarket
parts will void any warranty provided by AFX Motorsports and is not
recommended. AFX Motorsports products could interfere with other aftermarket
accessories. If user has aftermarket products on machine, contact AFX
Motorsports to verify that they will work together. Although AFX Motorsports
has thousands of satisfied customers, user should be aware that installing
bumpers, rock sliders, spare tire carriers, etc. will change the ride of
machine and may increase maintenance and part wear. Operating any off-road
machine while, or after, consuming alcohol and/or drugs increases risk of
bodily harm or death. No warranty or representation is made as to this
product’s ability to protect user from severe injury or death. AFX Motorsports
urges operators and occupants to wear a helmet and appropriate riding gear at
all times. By purchasing and installing AFX Motorsports products, user agrees
that should damages occur, AFX Motorsports will not be held responsible for
loss of time, use, labor fees, replacement parts, or freight charges. AFX
Motorsports, nor any 3rd party, will not be held responsible for any direct,
indirect, incidental, special, or consequential damages that result from any
product purchased from AFX Motorsports. The total liability of seller to user
for all damages, losses, and causes of action, if any, shall not exceed the
total purchase price paid for the product that gave rise to the claim. AFX
Motorsports will warranty only parts provided by AFX Motorsports. Any damage
or problems with OEM housings, bearings, seals, or other manufacturers’
products will not be covered by AFX Motorsports. AFX Motorsports parts and
products are not warrantied if item was not installed properly, misused, or
modified.
-
Place the rear suspensions on the rear side of the vehicle.
-
Check if your suspensions have mud flaps if they do, remove them.
-
Attach the arm guard using 5/16” x 3-1/2″ carriage screws on the back of the rear suspensions.
-
Secure with 1/4” x 3” Button screw on the front of the rear suspensions.
-
Repeat the process on the driver´s side.
For technical support , please write us to:
info@afxmotorsports.com or call us at:
Ph. 956-242-6521
HAVE FUN AND A SAFE RIDE!
www.afxmotorsports.com
4610 Modern Lane, Laredo, TX 78041 Ph.
956-242-6521
THIS PRODUCT IS FOR OFF ROAD USE ONLY
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>