AFX MOTORSPORTS ACC124 Small Utility Rack Installation Guide
- June 11, 2024
- AFX MOTORSPORTS
Table of Contents
AFX MOTORSPORTS ACC124 Small Utility Rack
Product Information
The product is a small utility rack designed for off-road use only, specifically for the Polaris Ranger 500-570. The package includes one pilot side support, one copilot side support, six plastic gaskets, six 5/16 hardware fittings, six 5/16 plain washers, four 5/16 x 3/4 hexagonal screws, four 5/16 lock washers, one crossbar, one 5/16 x 2 eyebolt, and one 5/16 plain washer. The product comes with a liability statement and requires a 7/16 combination wrench, a 7/32 Allen key, a Phillips screwdriver, and a 10 mm combination wrench for installation.
Product Usage Instructions
- Place the plastic gasket and fitting hardware under the copilot side support and loosely screw on the 5/16 x 2 eyebolt.
- Place the crossbar in the middle of the side support.
- Push down both sides of the side support until the metal base is placed on.
- Use a screwdriver to tighten up the eyebolts and repeat the process on the pilot side.
- Join the crossbar with the 5/16 x 3/4 hexagonal screw on both sides of the side racks and tighten all the screws.
Note: Do not tighten the screws until assembly is finished.
HOW TO INSTALL
Pieces included
Hardware
- (6x) 5/16” x 2” Eyebolt
- (6x) 5/16” Plain Washer
- (4x) 5/16” x 3/4” Hexagonal Screws
- (4x) 5/16” Lock Washer
Tools needed (Not Included)
- 7/16” Combination Wrench
- 7/32” Allen Key
- Phillips Screwdriver
- 10 mm Combination Wrench
Liability Statement
AF1 Motorsports products are designed to best fit user’s ATVIUTV under stock
conditions. Adding. modifying, or fabricating any factory or aftermarket parts
will void any warranty provided by AF1 Motorsports and is not recommended. AF1
Motorsports products could intertere with other aftermarket accessories. If
user has aftermarket products on machine. contact AF Motorsports to verity
that they wal work together. Although Ar motorsports has thousands of
satistied customers. user should be aware that installing bumpers. rock siers,
spare tire carters, etc, will change the roe ol machine and may increase
maintenance and part wear, Operating any off-road machine while. or after.
consumina alcohol and or drugs increases risk of bodily harm or death. No
warrant or representation is made as to this product’s ability to protect user
from severe inlury or death. AF Motorsports urges operators and occupants to
wear a home as to this produces abidy to protecs user from severe injury of
death, Ar Motorsports urgos operators and occupants to woar a home! and
appropriate riding gear at all times. By purchasing and installing AF1
Motorsports products, user agrees that should damages occur, AF1 Motorsports
will not be held responsible for loss of time, use, labor fees, replacement
parts, or freight charges. AF1
Motorsports, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from AF1 Motorsports. The total isbilitv of coller to user for all damages. losses and causes o action. it any. shall not exceed the total purchase price paw for the product that gave rise to the claim. A Motorsports will warranty only parts provided by AF1 Motorsports. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by AF1 Motorsports. AF1 Motorsports parts and products are not warrantied if item was not installed oroceriv, misused. or moditied
Note: Do not tighten the screws until assembly is finish.
- Put the 5/16” x 2” eyebolt and the 5/16” plain washer on the holes of the copilot and the pilot side support.
- Place the plastic gasket and fitting hardware under the side rack and loosely screw on the 5/16″ x 2″ Eyebolt.
- Push down both sides of the side support until the metal base is placed on top of the vehicle´s bed.
- Use a Screwdriver to tighten up the eyebolts and repeat the process on the pilot side.
- Place the crossbar in the middle of the side support.
- Join the crossbar with the 5/16” x 3/4” on both sides of the side racks and tighten all the screws.
For technical support, please write us to: info@afxmotorsports.com or call us at:
ADDRESS: 4610 Modern Lane, Laredo, TX 78041
Ph. 956-242-6521
Fax: 956-242-6521
www.atxmotorsports.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>