AFX MOTORSPORTS DEF064 Front Bumper Instruction Manual

: June 11, 2024
: AFX MOTORSPORTS

Table of Contents

HOW TO INSTALL
- HARDWARE
- Tools needed (Not Included):
Liability Statement
Customer Support
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

AFX MOTORSPORTS DEF064 Front Bumper

MOTORSPORTS DEF064 Front Bumper

THANK YOU
FOR PURCHASING AT AFX MOTORSPORTS

HOW TO INSTALL

Pieces included:

(1x) Front Bumper

HARDWARE

(2x) 3/8” Lock nut
(2x) 3/8” Plain Washer

Tools needed (Not Included):

9/16” Combination Wrench

Liability Statement

AF1 Motorsports products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by AF1 Motorsports and is not recommended. AF1 Motorsports products could interfere with other aftermarket accessories. If user has aftermarket products on machine, contact AF1 Motorsports to verify that they will work together. Although AF1 Motorsports has thousands of satisfied customers, user should be aware that installing bumpers, rock sliders, spare tire carriers, etc. will change the ride of machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect user from severe injury or death. AF1 Motorsports urges operators and occupants to wear a helmet and appropriate riding gear at all times. By purchasing and installing AF1 Motorsports products, user agrees that should damages occur, AF1 Motorsports will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. AF1 Motorsports, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from AF1 Motorsports. The total liability of seller to user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim. AF1 Motorsports will warranty only parts provided by AF1 Motorsports. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by AF1 Motorsports. AF1 Motorsports parts and products are not warrantied if item was not installed properly, misused, or modified.

Remove the plastic cover to place the front bumper.
Attach the front bumper to the vehicle. With the welded screws from the bumper, secure it to the vehicle using one plain washer and a lock nut on each side.(don´t tighten yet)
Finally, place the bolts that come with the vehicle in the holes that align on the front bumper.
Finally tighten all the screws.
Place the plastic cover back on the vehicle

Customer Support

Now you have completed the installation.
For technical support , please write us to:
info@afxmotorsports.com
Ph.956-242-6521
www.afxmotorsports.com
4610 Modern Lane, Laredo, TX 78041 Ph.956-242-6521
THIS PRODUCT IS FOR OFF ROAD USE ONLY

AFX-Logo