AFX MOTORSPORTS ACC087 Exhaust Cover Instruction Manual
- June 11, 2024
- AFX MOTORSPORTS
Table of Contents
AFX MOTORSPORTS ACC087 Exhaust Cover
HOW TO INSTALL
Pieces included:
-
(x1) Exhaust Cover
-
**(x2) Aluminum Clamp
**
Tools needed ( Not included ):
- Screwdriver
Liability Statement
AFX Motorsports products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by AFX Motorsports and is not recommended. AFX Motorsports products could interfere with other aftermarket accessories. If user has aftermarket products on machine, contact AFX Motorsports to verify that they will work together. Although AFX Motorsports has thousands of satisfied customers, user should be aware that installing bumpers, rock sliders, spare tire carriers, etc. will change the ride of machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect user from severe injury or death. AFXMotorsports urges operators and occupants to wear a helmet and appropriate riding gear at all times. By purchasing and installing AFX Motorsports products, user agrees that should damages occur, AFX Motorsports will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. AFX Motorsports, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from AFX Motorsports. The total liability of seller to user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim. AFX Motorsports will warranty only parts provided by AFX Motorsports. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by AFX Motorsports. AFX Motorsports parts and products are not warrantied if item was not installed properly, misused, or modified.
IMPORTANT: VERIFY THAT YOUR VEHICLE’S EXHAUST IS NOT HOT BEFORE BEGINNING THE INSTALLATION.
-
Locate in your vehicle the exhaust, like is shown in the image below
-
Place the aluminum exhaust cover to cover your muffler, use the 3 aluminum clamps to adjust the cover on your vehicle.
*NOTE: THE EXHAUST COVER IS CURVE, IT’S IMPORTANT THAT IF YOU DONT HAVE THE EXACT CURVE, FOLLOW THESE INSTRUCCTIONS:
USE YOUR HANDS TO FORCE A LITTLE BIT YOUR COVER TO MAKE THE CURVE FITS YOUR EXHAUST.
-
Make sure it’s tight and ready
For technical support , please write us to:
info@afxmotorsports.com or call us at:
Ph. 956-242-6521
www.afxmotorsports.com
4610 Modern Lane, Laredo, TX 78041 Ph.
956-242-6521
TI-HS PRODUCT IS FOR OFF ROAD USE ONLY
Documents / Resources
| AFX
MOTORSPORTS ACC087 Exhaust
Cover
[pdf] Instruction Manual
ACC087 Exhaust Cover, ACC087, Exhaust Cover, Cover
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>