BEGA 33 563 Light Brick Instruction Manual
- June 9, 2024
- BEGA
Table of Contents
BEGA 33 563 Light Brick
Product Information
- The Lichtbausteinb Rectangle is a ceiling and wall luminaire suitable for a variety of lighting tasks. It is ideal for places that require soft and uniform lighting distribution.
- The luminaire is designed for both interior and exterior applications and features a luminaire efficiency of 60%. The product contains a light source of energy efficiency class E and has a lamp output of a maximum of 40W.
- The luminaire is made of aluminum alloy and stainless steel and has a weight of 0.8 kg. It has an earth conductor connection, lampholder E14, safety class I, and protection class IP 44. The product is protected against granular foreign bodies of 1mm and splash water impact strength IK03.
- Additional BEGA LED lamps are available for this luminaire, and detailed technical and lighting data for the lamps can be found in the data sheets on the manufacturer’s website.
Product Usage Instructions
- Before installation, please ensure that you have read all national safety regulations that apply to the installation and operation of this luminaire. Only a qualified electrician should carry out the installation and commissioning of the product.
- The manufacturer does not accept any liability for damage caused by improper use or installation.
- If you make any subsequent modifications to the luminaire, you will be considered the manufacturer.
- To install the luminaire, lead the mains supply cable through the cable entry into the luminaire housing, fix the luminaire base with enclosed or any other suitable fixing material onto the mounting surface, make an earth conductor connection, push silicone sleeves over the lines and make electrical connection, insert the lamp, snap the opal glass into the lower spring clips, centralize and push it into the upper spring clips.
- To clean the luminaire, make sure that you have turned off the power supply.
- Extract the glass from the clips and remove it from the plate Clean the luminaire using only maintenance products that do not contain solvents.
- Do not use high-pressure cleaners during cleaning.
- The product comes with spare parts, including a spare glass LED lamp 3000K and a lampholder.
DIMENSION
Instructions for use
Application Lichtbausteinb Rectangle
Ceiling and wall luminaire for many lighting tasks. Ideal for places where a soft and uniform lighting distribution is required.For interior and exterior applications.
Lamp
- Luminaire with screw base E 14
- Lamp output max. 40 W
- This product contains light source of energy efficiency class E
Supplied lamp
- BEGA LED lamp 13 594
- LED Retrofit 4 W · 470 lm · 3000 K
- Luminaire efficiency: 60%
Additional BEGA LED lamps are available for this luminaire:
- 13 593 LED 4 W · 470 lm · 3000 K
Detailed technical and lighting data for the lamps can be found in the data sheets on our website.
Safety
The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Product description
- Luminaire made of aluminum alloy and stainless steel
- BEGA Unidure® coating technology
- Opal glass satin matt
- 1 fixing hole ø 7 mm
- 1 cable entry for mains supply cable up to ø 10,5 mm
- Lampholder terminal 2.5@
- Earth conductor connection
- Lampholder E 14 Safety class
- I Protection class IP 44
- Protected against granular foreign bodies ≥ 1 mm and splash water
- Impact strength IK03 Protection against mechanical impacts < 0.35 joule – Safety mark c – Conformity mark
- Weight: 0.8 kg
Installation
Lead the mains supply cable through the cable entry into the luminaire housing. Fix luminaire base with enclosed or any other suitable fixing material onto the mounting surface. Make earth conductor connection. Push silicone sleeves over the lines and make electrical connection. Insert lamp.Snap the opal glass into the lower spring clips, centralise and push into the upper spring clips.
Relamping Maintenance
- Disconnect the electrical installation.
- Pull glass out of the spring clips and remove it from the luminaire back housing.
- Clean the glass and luminaire housing using only suitable cleansers.
- When cleaning please do not use high-pressure cleaners.
- Change the lamp.
- Snap the glass into the lower spring clips, centralize and push into the upper spring clips.
Spares
- Spare glass 11 002 117 .0
- LED lamp 3000K 13 594
- Lampholder 63 000 051
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info@bega.com · http://www.bega.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>