COOPER Lighting Solutions IB51929121 Metalux Tunable White Instruction Manual
- June 10, 2024
- COOPER Lighting Solutions
Table of Contents
COOPER Lighting Solutions IB51929121 Metalux Tunable White
Product Information
The IB51929121 is a lighting fixture from Cooper Lighting Solutions. It features an integrated sensor and is designed for use in indoor environments. The fixture supports 0-10V dimming and CCT (Correlated Color Temperature) control, allowing users to adjust the brightness and color temperature of the light output. The product comes with push nuts for easy installation and is compliant with applicable installation codes.
Product Usage Instructions
- Before starting installation or attempting any maintenance, make sure the power is OFF. Disconnect power at the fuse or circuit breaker to avoid the risk of fire and electric shock.
- For a fixture with an integrated sensor, locate two control wires with push nuts (violet / white stripe, pink / black stripe) and skip to step 4. For a fixture without an integrated sensor, locate four control wires with push nuts (violet, pink, violet / white stripe, pink* / black stripe).
- Use the supplied push nuts to connect the control input 0-10V dimming violet and pink wires to the corresponding fixture violet and pink wires.
- Use the supplied push nuts to connect the control input 0-10V CCT wires to the corresponding fixture violet/ white stripe and pink*/black stripe wires.
- If your construction was built before Jan 2022 and has a gray wire for 0-10 dimming control, label it as a 0-10 dimming wire and connect it to the product’s pink 0-10V dimming control wire. Reference NFPA70 (2020 NEC), section 410.69.
- Handle the fixture with care due to sharp edges to avoid the risk of personal injury.
- Disconnect power and allow the fixture to cool before handling or service to avoid the risk of burn.
- Installation and maintenance of this product must be performed by a qualified electrician who is familiar with the construction and operation of the product and the hazards involved.
WARNING
- Risk of Fire, Electrical Shock, Cuts, or Other Casualty Hazards- Installation and maintenance of this product must be performed by a qualified electrician. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Risk of Fire and Electric Shock- Make certain power is OFF before starting installation or attempting any maintenance. Disconnect power at the fuse or circuit breaker.
- Risk of Fire- Minimum 90°C supply conductors.
- Risk of Burn- Disconnect power and allow the fixture to cool before handling or servicing.
- Risk of Personal Injury- Due to sharp edges, handle with care.
- Failure to comply with these instructions may result in death, serious bodily injury, and property damage.
DISCLAIMER OF LIABILITY:
Cooper Lighting Solutions assumes no liability for damages or losses of any
kind that may arise from the improper, careless, or negligent installation,
handling, or use of this product. IMPORTANT: Read carefully before installing
the fixture. Retain for future reference.
- NOTICE: Green ground screw provided in the proper location. Do not relocate.
- NOTICE: The fixture may become damaged and/or unstable if not installed properly.
- Note: Specifications and dimensions are subject to change without notice.
- ATTENTION Receiving Department: Note the actual fixture description of any shortage or noticeable damage on the delivery receipt. File claim for common carrier (LTL) directly with the carrier. Claims for concealed damage must be filed within 15 days of delivery. All damaged material, complete with original packing must be retained.
INSTALLATION
CCT and dimming connections
-
Remove the access plate to access wires. (Figure 1.)
-
For a fixture without an integrated sensor, locate four control wires with push nuts (violet, pink, violet / white stripe, pink / black stripe). (Figure 2.)
For a fixture with an integrated sensor, locate two control wires with push nuts (violet / white stripe, pink* / black stripe) and skip to step 4. (Figure 3.) -
Use the supplied push nuts to connect the control input 0-10V dimming violet and pink wires to the corresponding fixture violet and pink wires. (Figure 2.)
-
Use the supplied push nuts to connect the control input 0-10V CCT wires to the corresponding fixture violet/white stripe and pink*/black stripe wires. (Figures 2 and 3.)
Constructions built before Jan 2022 may have gray wire for 0-10 dimming control present. In these cases, the installer will label the gray building wire as a 0-10 dimming wire and connect it to our product’s pink 0-10V dimming control wire. Reference NFPA70 (2020 NEC), section 410.69.
FCC Statement
Note:
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Warranties and Limitations of Liability
Please refer to www.cooperlighting.com for our terms and conditions.
Cooper Lighting Solutions
1121 Highway 74 South Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Canada Sales
5925 McLaughlin Road Mississauga, Ontario L5R 1B8
P: 905-501-3000
F: 905-501-3172
© 2021 Cooper Lighting Solutions
All Rights Reserved
Printed in the USA
Cooper Lighting Solutions is a registered trademark. All trademarks are the property of their respective owners.
Product availability, specifications, and compliances are subject to change without notice.