beper P102ACP100 USB Rechargeable Corkscrew Instruction Manual
- June 10, 2024
- beper
Table of Contents
beper P102ACP100 USB Rechargeable Corkscrew Instruction Manual
USB rechargeable corkscrew
Description of product Fig.A
- Release button
- Cork extraction button
- Charging socket
- Operation LED
- Foil cutter
- USB charging cable
Recharge
Plug the USB cable into the charging port and plug it into the electrical
outlet.
Charge the product 12 hours before first use, long charging times will not
damage the battery.
If the product has not been used for more than a month, please recharge it. A
full recharge takes 16 hours.
Use
With one hand, hold the bottle steady and cut the foil with the foil cutter.
Insert the corkscrew onto the bottle, making sure it stays in line with it. Press and hold the cork extraction button and gently move the corkscrew downwards. The cork will be removed in about 6-8 seconds and the corkscrew will stop automatically. Press the release button for 5-7 seconds to release the cap.
While using the corkscrew, always hold the bottle steady with one hand.
Technical Data
3.6V 500 mAh Ni-Mh rechargeable battery
USB power supply: 5V
For any improvement reasons, Beper reserves the right to modify or improve the product without any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream.
Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.
GUARANTEE CERTIFICATE
This appliance has been checked in the factory. From the date of original
purchase a 24 month guarantee applies to material and production defects. The
purchase receipt and the guarantee certificate must be submitted together in
case
of claim to guarantee.
The guarantee is valid only with a guaranty certificate and proof of purchase (fiscal receipt) indicating the date of purchase and the model of the appliance
For any technical assistance, please contact directly the seller or our head office in order to preserve the appliance’s efficiency and NOT TO void the guarantee. Any intervention on this appliance by non-authorized persons will automatically void the guarantee.
Contact your distributor in your country or after sales department beper.
E-mail assistenza@beper.com which will forward your
enquiries to your distributor.
CUSTOMER CARE BEPER
BEPER SRL
Via Salieri, 30 – 37050 – Vallese di Oppeano – Verona
Tel. 045/7134674 – Fax 045/6984019
beper.com