EVOLUTION POWERSPORTS 925FP0193 Kickplates Kit for Polaris RZR 200 Instruction Manual
- June 9, 2024
- EVOLUTION POWERSPORTS
Table of Contents
EVOLUTION POWERSPORTS 925FP0193 Kickplates Kit for Polaris RZR 200
RZR 200 Kickplate Kit
SKU(s): 925FP0193 (white), 925FP0194 (red), 925FP0195 (black)
INCLUDED PARTS
- (1) Set of Kickplates
REQUIRED TOOLS
- T-40 Socket
INSTALLATION INSTRUCTIONS
- Step 1: Remove (6) screws holding the OEM lower plastic to the car. (2) screws are located underneath the door, it helps to open the door.
- Step 2 : Install the EVP kick plate onto the vehicle. Reuse OEM hardware and fasten down.
Thank you for choosing Evolution Powersports products. If you require further
assistance, please call our Tech Support @
715-247-3862
Note: This product is exempt from the emission standards and related
requirements of 40 C.F.R. § 1051 as provided by 40 C.F.R. § 1051.620, and
California law [e.g., vehicle code§§ 27156 and 38391]. This product is sold
only for use in connection with EPA certified, purpose-built, nonroad vehicles
used solely for closed course, nonroad competition/racing and not used for any
recreational purpose or on public highways or right of ways maintained by and
open to the public. This product is sold only in connection with machines that
do not fall under state and/or federal noise or emission
standards/regulations. Purchasers who/that purchase this product represent and
warrant that the product is purchased only in connection with EPA -certified,
emission-regulations-exempt and noise-regulations-exempt competition/racing
vehicles as interpreted under applicable state and/or federal law. Questions:
Call Evolution Powersports at
715-247-3862.
WE’D LOVE TO HEAR FROM YOu – LEAVE A REVIEW & STAY CONNECTED!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>