EVOLUTION POWERSPORTS 800FP0001 XR Series XP Turbo-S and Pro XP 11mm CA625 Head Stud Kit Instruction Manual
- October 27, 2023
- EVOLUTION POWERSPORTS
Table of Contents
EVOLUTION POWERSPORTS 800FP0001 XR Series XP Turbo-S and Pro XP 11mm CA625 Head Stud Kit Instruction Manual
NOTE: THIS JOB REQUIRES MECHANICAL SKILL. IF YOU DO NOT HAVE THE MECHANICAL SKILL, LEAVE THIS JOB TO A PROFESSIONAL! SEVERE ENGINE DAMAGE WILL OCCUR IF YOU DO NOT KNOW PROPER MECHANICAL PROCEDURES! THESE INSTRUCTIONS ARE FOR REFERENCE ONLY. REFER TO THE POLARIS SHOP MANUAL FOR FURTHER INSTRUCTIONS!
- Although this job can be done without removing the bed, it is far easier with it removed.
- Remove heat shields to provide clear access to the top of the engine.
- See instructions on the following pages.
Thank you for choosing Evolution Powersports products. If you require further assistance, please call our Tech Support @ (715) 247-3862
Note : This product is exempt from the emission standards and related requirements of 40 C.F.R. § 1051 as provided by 40 C.F.R. § 1051.620, and California law [e.g., vehicle code§§ 27156 and 38391]. This product is sold only for use in connection with EPA certified, purpose-built, nonroad vehicles used solely for closed course, nonroad competition/racing and not used for any recreational purpose or on public highways or right of ways maintained by and open to the public. This product is sold only in connection with machines that do not fall under state and/or federal noise or emission standards/regulations. Purchasers who/that purchase this product represent and warrant that the product is purchased only in connection with EPA -certified, emission-regulations-exempt and noise-regulations exempt competition/racing vehicles as interpreted under applicable state and/or federal law. Questions: Call Evolution Powersports at (715) 247-3862.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>