EVOLUTION POWERSPORTS 925FP0202 Front Grille Bezel for Polaris RZR 200 Instruction Manual
- June 9, 2024
- EVOLUTION POWERSPORTS
Table of Contents
EVOLUTION POWERSPORTS 925FP0202 Front Grille Bezel for Polaris RZR 200
RZR 200 Front Grille Bezel Kit
SKU(s): 925FP0201 (raw), 925FP0202 (red), 925FP0203 (white)
INCLUDED PARTS
(1) Grille Bezel
(1) Hardware Kit
REQUIRED TOOLS
Push Dart Tool
T-40 Socket
1/16” Allen Wrench
1/4″ Socket
7/64” Drill Bit
INSTALLATION INSTRUCTIONS
- Step 1: Remove (2) push darts holding the hood center piece on. Remove (2) push darts underneath the hood center piece.
- Step 2: Remove (3) push darts on both front fenders.
- Step 3: Unplug both low/high beam connectors, located underneath the hood.
- Step 4: Remove (4) T-40 screws holding the front clip onto the vehicle. (2) are located in the front of the vehicle under the headlights. The other (2) are located underneath the car where the A-arms connect to the frame. Now remove the front clip.
- Step 5: Bring the front clip to a work bench. Lay the grille bezel in place. With a 7/64” drill bit, drill through each hole one by one, installing hardware after each hole is drilled.
- Step 6 : With a 1/16” Allen wrench and 1/4″ socket, fasten down all hardware. DO not over tighten.
- Step 7: Reinstall the front clip with all hardware. Don’t forget to reconnect the low/high beam connectors.
Thank you for choosing Evolution Powersports products. If you require further
assistance, please call our Tech Support @
715-247-3862
Note: This product is exempt from the emission standards and related
requirements of 40 C.F.R. § 1051 as provided by 40 C.F.R. § 1051.620, and
California law [e.g., vehicle code§§ 27156 and 38391]. This product is sold
only for use in connection with EPA certified, purpose-built, nonroad vehicles
used solely for closed course, nonroad competition/racing and not used for any
recreational purpose or on public highways or right of ways maintained by and
open to the public. This product is sold only in connection with machines that
do not fall under state and/or federal noise or emission
standards/regulations. Purchasers who/that purchase this product represent and
warrant that the product is purchased only in connection with EPA -certified,
emission-regulations-exempt and noise-regulations-exempt competition/racing
vehicles as interpreted under applicable state and/or federal law. Questions:
Call Evolution Powersports at
715-247-3862.
WE’D LOVE TO HEAR FROM YOU- LEAVE A REVIEW & STAY CONNECTED!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>