EVOLUTION POWERSPORTS 925FP0190 RZR 200 Shift Knob Kit Instruction Manual
- June 9, 2024
- EVOLUTION POWERSPORTS
Table of Contents
EVOLUTION POWERSPORTS 925FP0190 RZR 200 Shift Knob Kit
RZR 200 Shift Knob Kit
SKU(s): 925FP0190 (red), 925FP0191 (white)
INCLUDED PARTS
(1) Shift Gate
(1) Shift Knob
(1) Shift Lever
(1) Hardware Kit
REQUIRED TOOLS
Push Dart Tool
10,12mm Socket/Wrench
1/16” Allen Wrench
1/4″ Socket
Philips Screwdriver
7/64” Drill Bit
INSTALLATION INSTRUCTIONS
- Step 1: Slide both seats forward, behind the seats you will find (2) bolts. With a 10mm socket remove the bolts and remove the seats.
- Step 2: With a push dart tool remove (11) push darts holding the center console in. Also remove (4) more push darts on both driver and passenger side. This will help remove the center console.
- Step 3: Push the seat belt boots down into the center console. Lift and remove the center console out of the vehicle.
- Step 4 : Bring the center console to a work bench. Place shift gate on the center of the console. Line up the passenger side cut out right before the “R-N-F” letters. This will allow for proper shifting. With a 7/64” drill bit, drill out one hole at a time and install supplied hardware.
- Step 5: Remove the OEM shift lever by loosening the bolt and nut with a 12mm socket and wrench. Be careful not to break the plastic. There is spring tension on the driver side plastic plate. With a screwdriver loosen and remove the lever set screw.
- Step 6: Install supplied shift lever with supplied set screw. Reinstall the spring, plastic cover and bolt. Make sure the shift lever cut out is facing the passenger side. This will orientate the shift knob in the correct direction.
- Step 7: Reinstall the center console with shift gate. Reinstall the seat belt boots and all push darts.
- Step 8: Install the billet shift knob and secure with supplied Allen set screw.
- Step 9: Reinstall both seats and torque frame bolts to 30 ft-lb.
Thank you for choosing Evolution Powersports products. If you require further
assistance, please call our Tech Support @
715-247-3862
Note: This product is exempt from the emission standards and related
requirements of 40 C.F.R. § 1051 as provided by 40 C.F.R. § 1051.620, and
California law [e.g., vehicle code§§ 27156 and 38391]. This product is sold
only for use in connection with EPA certified, purpose-built, nonroad vehicles
used solely for closed course, nonroad competition/racing and not used for any
recreational purpose or on public highways or right of ways maintained by and
open to the public. This product is sold only in connection with machines that
do not fall under state and/or federal noise or emission
standards/regulations. Purchasers who/that purchase this product represent and
warrant that the product is purchased only in connection with EPA -certified,
emission-regulations-exempt and noise-regulations-exempt competition/racing
vehicles as interpreted under applicable state and/or federal law. Questions:
Call Evolution Powersports at
715-247-3862.
WE’D LOVE TO HEAR FROM YoU – LEAVE A REVIEW & STAY CONNECTED!