Westinghouse PWTN Turbo Nozzle for Pressure Washers Instruction Manual
- June 9, 2024
- Westinghouse
Table of Contents
Westinghouse PWTN Turbo Nozzle for Pressure Washers
WARNING
User must read and understand the operator’s manual for their pressure washer before using this accessory to reduce the risk of injury. Before beginning any cleaning activity, spray the pressure stream in a safe direction to make sure that all accessories are connected properly in order to minimize the danger of injury or property damage. Fits most pressure washers. Before using this attachment, make sure it is compatible and is correctly installed. Risk of fluid injections. Do not point at people, pets, electrical devices, or the unit itself. Wear eye protection designated to conform with ANSI Z87.1. Before adding, replacing, or modifying accessories, turn off the pressure washer, release the water pressure in the trigger handle, and lock the trigger handle’s lock out (if one is provided with your pressure washer). Use only with cold water and only outdoors. Store the accessory indoors. Save these guidelines. Use them to train other users and refer to them frequently. Give the user of the tool these instructions as well.
PRODUCT SPECIFICATIONS
- Connection ……………………………………….. 1/4 in. Quick Connect Plug Inlet
- Maximum Pressure …………………………………………………….. up to 3600 psi
- Maximum Water Flow ……………………………………………………………. 4 GPM
- Maximum Water Temperature ………………………………………………….. 140°F
APPLICATIONS
You may use this product for the purposes listed below:
Cleaning concrete driveways, sidewalks, and foundations
INSTALLING THE TURBO NOZZLE
This attachment installs on the
end of the spray lance same as any nozzle as described in your pressure
washer’s operator’s manual.
- If necessary, remove the nozzle from the end of the lance.
- Pull back the quick-connect collar and insert the turbo nozzle.
NOTE : Be sure the turbo nozzle is locked securely into the lance.
- A – Turbo nozzle
- B – Spray lance
Service Hotline: 855-944-3571
777 Manor Park Drive, Columbus, OH 43228 and Westinghouse are trademarks of
Westinghouse Electric Corporation.
Used under license by MWE Investments, LLC.
© 2022 MWE Investments, LLC All Rights Reserved