Power Technologies AC-STAND-75 Interactive Flat Panel Stand, Cart User Manual
- August 12, 2024
- Power Technologies
Table of Contents
- Power Technologies AC-STAND-75 Interactive Flat Panel Stand, Cart
- Product Information
- Product Usage Instructions
- FAQ
- Product Information
- Installation Instructions
- Identifying Parts
- Installation Instructions
- Anti-Tip Bar Instruction
- Casters Positions
- Safety Instructions
- WARRANTY
- Further Information
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Power Technologies AC-STAND-75 Interactive Flat Panel Stand, Cart
Product Information
Specifications:
- Model: AC-STAND-75
- VESA Dimensions Adjustable Mounting Brackets (mm): 400×200, 400×400, 600X200, 600X400, 800X400
- Exterior Dimensions: 17 (D) x 37.75 (W) & 70.25 (H) Inch, 432 (D) x 959 (W) & 1784 (H) mm
- Product Weight (Weight Without Devices): 62 lbs (28 kg)
- Shipping Weight: 70 lbs (31.6 kg)
- Maximum Display Size Supported: supports up to 75 inch (1905 mm)
- Supported Devices: Wall mount televisions and flat panels
- Casters: Four 4 Casters; 2-Locking, 2-Directional
- Work Platform Loading: 200 lbs (90.7 kg)
- Storage RH%: 5% – 95%
- Warranty: Lifetime Frame, 2 Years Components
Product Usage Instructions
Installation Instructions:
- REMOVING FROM BOX
- Step-1 : Remove the strapping with scissors or plier cutters. Do not use a box cutter.
- Step-2: Lift and Remove the top cardboard lid.
- Step-3: Your Stand arrives in 1 box and contains 4 layers for ease of assembly.
- Identifying Parts
- Carefully remove all parts from box.
- Locate the bag of hardware as this will be needed throughout the installation.
- Lay parts out on a flat surface.
- Ensure no parts are missing.
- SETTING UP STAND
- Step-1 : Place the Base on a flat surface.
- Step-2: Find the Uprights and ensure the holes are on the outside.
- Step-3: Slide both left and right Uprights into the Base’s posts.
- Step-4: Loosely fit the screws connecting the left and right uprights to the base of the stand. Do not fully tighten hardware at this point.
FAQ
-
What is the maximum display size supported by AC-STAND-75?
The AC-STAND-75 supports displays up to 75 inches (1905 mm). -
What is the warranty coverage for the AC-STAND-75?
The AC-STAND-75 comes with a lifetime frame warranty and a 2-year components warranty. -
How much weight can the work platform of AC-STAND-75 support?
The work platform of AC-STAND-75 can support up to 200 lbs (90.7 kg).
Product Information
The AC-STAND-75 is designed to fit interactive flat panel displays up to 75 inches. Please review this guide to learn how to safely use your product.
Specifications:
Model | AC-STAND- 75 |
---|
VESA Dimensions
Adjustable Mounting Brackets (mm)
| 400×200, 400×400, 600X200, 600X400, 800X400
Exterior Dimensions
| Inch| 17 (D) x 37.75 (W) & 70.25 (H)
mm| 432 (D) x 959 (W) & 1784 (H)
Product Weight
(Weight Without Devices)
| 62 lbs (28 kg)
Shipping Weight| 70 lbs (31.6 kg)
Maximum Display Size Supported| supports up to 75 inch (1905 mm)
Supported Devices| Wall mount televisions and flat panels
Power Specifications| NA
Charging Type| NA
Security| NA
Casters| Four 4” Casters; 2-Locking, 2-Directional
Work Platform Loading| 200 lbs (90.7 kg)
Working Temperature| NA
Working RH%| NA
Storage Temperature| NA
Storage RH%| 5% – 95%
Warranty| Lifetime Frame, 2 Years Components
Overview
- The AC-STAND-75 is designed to fit interactive flat panel displays up to 75 inches.
- Please review this guide to learn how to safely use your product.
- If the device (Laptop / Chromebook) thickness is more than the gap between the dividers, remove one of the dividers to create enough space for your device.
Installation Instructions
REMOVING FROM BOX
- Step-1: Remove the strapping with scissors or plier cutters. Do not use a box cutter.
- Step-2: Lift and Remove the top cardboard lid
- Step-3: Your Stand arrives in 1 box and contains 4 layers for ease of assembly.
Identifying Parts
- Carefully remove all parts from box.
- Locate the bag of hardware as this will be needed roughout the installation.
- Lay parts out on a flat surface (see below).
- Ensure no parts are missing.
Installation Instructions
SETTING UP STAND :
- Step-1: Place the Base on a flat surface.
- Step-2: Find the Uprights and ensure the holes are on the outside.
- Step-3: Slide both left and right Uprights into the Base’s posts.
- Step-4: Loosely fit the screws connecting the left and right uprights to the base of the stand. Do not fully tighten hardware at this point.
- Step-5: Find the Middle Shelf.
- Step-6: Slide it in place so the notches are toward the long (back) edges of the Uprights.
- Step-7: Loosely fit the screws on the outside of the left and right uprights to connect the middle shelf. Do not fully tighten hardware at this point.
- Step-8: Find the Left and Right Upper Pillars.
- Step-9: Fit them into the Uprights so the 4 holes are facing the sides.
- Step-10: Loosely fit the screws connecting the left and right upper pillars to the uprights. Do not fully tighten hardware at this point.
- Step-11: Find the Backplate.
- Step-12: Facing the back of the stand, Fit the Backplate onto the Uprights so the post slides are facing you.
- Step-13: Loosely fit the screws connecting the backplate onto the upper pillars. Do not fully tighten hardware at this point.
- Step-15: Starting from the top, working to the bottom, tighten all hardware with the provided hex wrench.
- Step-16: The Left and Right Mounting Strips are installed on your flat panel screen using your own VESA mounting bolts and hung onto the Backplate.
Anti-Tip Bar Instruction
-
Anti-tip supports are factory installed in the base of the cart.
-
They need to be deployed prior to the installation of the panel and when the cart is in any stationary position.
-
To remove the bars, loosen the thumb screws located in the bar socket.
-
Pull the bars straight out.
-
Rotate the bars 90 degrees and re-insert the bars until they are seated.
-
Retighten the thump under underneath the cart.
-
Photo shows bars that have been properly installed.
Casters Positions
- This cart is equipped with Casters that have an “Blue” color foot pedal.
- Engage the Directional Locking Casters by pressing the blue foot pedal down. Your cart will now easily track in a straight line.
- Release the Direction Lock by lifting up on the foot pedal. The cart will have its full swivel motion restored.
-
“Engage the BLACK foot pedal to securely lock the wheels, keeping the cart safely in place.”
-
“Engage the blue foot pedal for a seamless and precise straight-line movement, making navigation a breeze.”
-
“With a simple release of the BLACK foot pedal, allowing you to navigate effortless with unparalleled flexibility.”
-
“With a simple release of the blue foot pedal, embrace a world of precision and grace in your swivel motion, making maneuvering a breeze.”
Safety Instructions
THIS IS NOT A TOY. ALWAYS FOLLOW SAFETY INSTRUCTIONS.
WARNING
-
THE ELECTRICAL SYSTEM IS DESIGNED TO HANDLE A MAXIMUM OF 1500 WATTS.
If wattage exceeds 1500W at one time, the charging system may not operate correctly. Remove devices until the total wattage is under 1500W. -
ALWAYS FOLLOW SAFETY PRECAUTIONS.
- ONLY ADULTS should move the stand.
- NEVER climb, sit on or tilt the stand.
- ALWAYS move the cart slowly and be aware of your surroundings.
- ALWAYS extend and secure tilt bars to avoid tipping.
- DO NOT mount any panel over 75”.
- DO NOT mount any panel over 120lbs.
- DO NOT remove this decal.
- NEVER run over the cord.
- NEVER cross thresholds at an unsafe speed.
- ALWAYS set the cater break when done moving.
- DO NOT touch any part of the electrical system while plugged in.
- DO NOT connect the stand with broken electrical components.
- DO NOT use an extension cord with this unit.
WARRANTY
- For warranty claims, please have the following information ready, then visit : www.powertechnologies.com
- To create a help ticket.
Further Information
For further information on this product and others, contact Power Technologies at.
- Power Technologies
- 42035 Zevo Dr.
- Temecula, CA 92590
- 888.650.4488
- support@powertechnologies.com
- www.powertechnologies.com
- 42035 Zevo Drive Temecula, CA 92590
- 888-650-4488
- www.powertechnologies.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>