SANUS LLF225 Wall Mount Instruction Manual

SANUS LLF225 Wall Mount

WE’RE HERE TO HELP

• Want to watch a video that shows how easy this DIY project will be?
• Get it right the first time. HeightFinder™ shows you where to drill.
• Our US-based install experts are standing by to help.

• Watch it now at: SANUS.com/3087
• Check it out at: SANUS.com/2850
• Call us at:
  1-855-734-7805

IMPORTANT SAFETY INSTRUCTIONS

• PLEASE READ MANUAL PRIOR TO USE
• SAVE THESE INSTRUCTIONS

CAUTION: Avoid potential personal injuries and property damage!

• This product is designed ONLY to be installed into wood studs, solid concrete or concrete block
  DO NOT INSTALL INTO DRYWALL ALONE
  DRYWALL ALONE WILL NOT HOLD THE WEIGHT OF YOUR TV

• This product is designed for INDOOR USE ONLY

• The wall must be capable of supporting five times the weight of the TV and mount combined

• Do not use this product for any purpose not explicitly specified by manufacturer

• Manufacturer is not responsible for damage or injury caused by incorrect assembly or use

Please read through these instructions completely to be sure you’re comfortable with this easy install process.
Check your TV owner’s manual to see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact Customer Service.

TV Weight Limit

(including accessories)
DO NOT EXCEED

120 lbs.(54.4 kg)

If your TV (plus accessories) weighs MORE, this mount is NOT compatible.
Visit SANUS.com or call customer service to find a compatible mount.

Wall Construction

ONLY install on these acceptable wall types.

Unsure
Call Customer Service 1-855-734-7805

Tools Needed

Dimensions

BEFORE YOU BEGIN

• Remove the stand
  from your TV — if attached.

• Install any accessories
  you may have purchased, if they require TV removal prior to assembly. The TV is removable for future accessory purchases.

• Protect the face
  of your TV when laying it down for installation.

Supplied Parts and Hardware

WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!

STEP 1 Attach TV Bracket to TV

Select TV Screw Diameter

Select TV Screw Length and Spacers

A NO SPACER

NOTE: If your TV included inset spacers or adapters, use them UNDER the mount hardware.

B SPACER NEEDED

CAUTION: Verify adequate thread engagement with your screw 01 , washer 02 , spacer 03 combination AND TV bracket 04 .
— Too short will not hold your TV. — Too long will damage your TV.

Attach TV Brackets to Your TV

• Center Horizontal TV brackets 04 over your TV’s hole pattern and loosely attach using screw combination A or B you selected for your TV.
• Position the vertical TV support 05 onto the horizontal supports 04 and loosely attach four screws 06 .
• Tighten the four TV screws 01 and four TV bracket screws 06 only enough to secure the TV brackets 04 / 05 to the TV.

Wood Stud Installation

STEP 2A Attach Wall Plate

CAUTION: Avoid potential personal injury or property damage!

• Drywall covering the wall must not exceed 5/8 in. (16 mm)
• Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1½ x 3½ in. (38 x 89 mm)
• Stud center must be verified

• IMPORTANT: Be sure to drill into the center of the stud.
• CAUTION: Avoid potential personal injury or property damage!Improper use could reduce the holding power of the lag bolt 09 . Tighten the lag bolts 09 only until the washers 10 are pulled FIRMLY against the wall plate 08 . DO NOT over-tighten the lag bolts 09 .

Solid Concrete or Concrete Block Installation

STEP 2B Attach Wall Plate

CAUTION: Avoid potential personal injury or property damage!

Mount wall plate 08 directly onto concrete surface (no wall covering)
Minimum solid concrete thickness: 8 in. (203 mm)
Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)

Concrete Installation Kit CMK1 is not included
Contact Customer Service at 1-855-734-7805 to inquire about the additional hardware.

CAUTION: Be sure the anchors C1 are seated flush with the concrete surface.
Fischer UX10 x 60R C1 – included in the Concrete Installation Kit CMK1.

CAUTION: Avoid potential personal injury or property damage!Improper use could reduce the holding power of the lag bolt 09 . Tighten the lag bolts 09 only until the washers 10 are pulled FIRMLY against the wall plate 08 . DO NOT over-tighten the lag bolts 09 .

STEP 3 Hang TV onto Wall Plate

HEAVY! You may need assistance with this step.

Use two people to hang the TV, to visually ensure TV bracket 05 is hung onto arm assembly 08 at your desired height slot.
CAUTION: Avoid potential personal injury or property damage! Locking screw 11 must be installed to secure the TV to the arm assembly 08

Manage Cables

1. IMPORTANT: Fully extend arm assembly 08 to ensure enough slack in cables.
2. Route your cables through the arms 08

TV Adjustments

TILT ADJUSTMENT

• Your TV should adjust easily when moved, then stay in place.
• If your TV is too loose or too tight, adjust the side tension knob T .
• NOTE: Once your TV is in place, tighten the tension knob T to prevent unwanted movement.
• NOTE: Additional tension can be applied using hex key 12

LEVEL ADJUSTMENT

HEIGHT

HEAVY! You may need assistance with this step.

1. Remove the TV (see below).
2. Follow STEP 3 to hang the TV to your new location using the height adjustment slots

SIDE-TO-SIDE SHIFT

1. Loosen the two screws S shown.
2. Slide the arm along the wall plate.
3. Tighten the screws S

EXTEND / RETRACT — ONLY IF NECESSARY

Your TV should adjust easily when moved, then stay in place. ONLY if needed, adjust the extension/retraction arm tension with screw R using hex key 12

CAUTION: Avoid potential personal injury or property damage!
DO NOT remove bolts R , only turn enough for slight adjustment

REMOVING THE TV

HEAVY! You may need assistance with this step.

1. Disconnect cables.
2. Remove screw 11 using hex key 12
3. Lift TV up and off the arm assembly 08

Thank you for choosing SANUS! Please take a moment to let us know how we did:
Call us: 1-855-734-7805
Email us: info@sanus.com
Leave a review: SANUS.com

Legrand AV Inc. and its affiliated corporations and subsidiaries (collectively, “Legrand”), intend to make this manual accurate and complete. However, Legrand makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Legrand makes no representation of warranty, expressed or implied, regarding the information contained herein. Legrand assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.
©2022 Legrand AV Inc. All rights reserved. SANUS is a brand of Legrand. SANUS, HeightFinder, and the SANUS logo are trademarks of Legrand.

Legrand AV Inc. • 6436 City West Parkway • Eden Prairie, MN 55344 USA

References

• SANUS | #1 Brand of TV Wall Mounts in the U.S.
• HeightFinder | SANUS
• TV Mounts and Stands | Products | SANUS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>