Camgeet KC-KVM8201 8K USB 3.0 KVM Switch HDMI 2 Port Installation Guide

Installation Guide

Frequently asked questions and answers

Q1: Do I only need to use 1 HDMI cable + 1 USB3.0 cable to connect the computer and KVM?

A1:Yes,each PC needs 1HDMI cable + 1USB3.0 cable to connect with KVM, the HDMI cable transmits audio and video signals, USB cable transmits data signals for USB devices (Such as keyboard mouse and U disk） and powers KVM at the same time, there are 2 USB3.0 cables in the package, you need to prepare 3 HDMI cables, 2 for connecting the two computers with KVM, 1 for connecting KVM with monitor, 8K HDMI2.1 cables are recommended.

Q2: After connecting the KVM correctly according to the instructions, why does the monitor flicker or the monitor does not work?

A2: This KVM does supports resolution up to 8K@60Hz,4K@120Hz and backward compatible, the specific resolution and refresh rate depend on your computer, monitor, HDMI cables and other hardware devices. You need to set the resolution and refresh rate of your computer and monitor to match parameters; if your HDMI cable version is too low or too long, the monitor will flicker or not work. It is recommended to use 8K HDMI2.1 cables, and the length of a single cable should not exceed 1.5 meters.

Q3: I just need to switch the video, is it possible without connecting the USB cable?

A3: No, the USB cables are used for data transfer and powering the KVM, without connecting the USB cable, you will not be able to use USB devices such as keyboard and mouse.

Q4: What cables are included in the package?

A4: There are two 1.5m USB3.0 cables and a wired remote control in the package, and you need to prepare three 8K HDMI2.1 cables. (Because some users do not need to use 8K resolution, and 8K HDMI cables are more expensive, So we don't provide HDMI cable, please be informed)

Q5: Does this KVM switch support hotkey switching?

A5: No, but besides the switch button, there is also a wired remote control with a length of 1.5 meters, which is very convenient for you to manage the cables.

Q6: Does this KVM switch support emulated EDID?

A6: NO, after switching, the arrangement order of the originally opened windows will be slightly shifted. If you need a KVM that supports EDID emulation, recommend ASIN: B0BYV3K29S.

Q7: My desktop only has DP ports, and my laptop only has one USB-C port, will it work for my computers?

A7: The KVM supports DP to HDMI, USB C to HDMI, and does not support VGA/DVI to HDMI. Note that the resolution and refresh rate may be reduced through the converter, depending on your converter. Q8: The KVM output is a HDMI port and my monitor is a VGA port, is that applicable? A8: You can use a HDMI to VGA converter or cable, Note:the vast majority of VGA monitors on the market only support 1080P at the highest.

Q9: Can I connect hard drives?

A9:Not recommended because the KVM is powered by the USB cables connected to the computers and cannot provide enough power for hard drives.(hard drive is high power consumption)

Q10: How can I do if the wireless network is affected when using this dual monitor KVM switch?

A10: Please set your router from 2.4GHz to 5GHz for a try.

Q11: Is this KVM switch plug and play?

A11: Yes, it is plug and play, and no driver is needed.

Q12: What if my MacBook doesn't have HDMI and USB A port?

A12: You can use it with a MacBook, but you need to connect the Mac to the switch via a USB-C to HDMI adapter and USB-C to USB-A adapter or USB-C docking station with HDMI and USB A port.

Q13: Can I use this KVM switch to wake up a sleeping computer?

A13: No, it can't wake up a sleeping computer. You need to push the power button of your computer to wake it up for work.

Q14: Does this KVM switch have the led indicator?

A14: Yes, it has two LED indicators and the wired remote control with digital 1/2 LED indicators. The corresponding led indicator will light according to the computer you switch to.

Q15: Why is there a lagging issue sometimes when using the wireless mouse or keyboard?

A15: The reason for the lagging issue might be as follows. 1. The broadband noise from USB 3.0 data spectrum is in the 2.4-2.5GHz range. If the antenna of a wireless device operating in this band such as 2.4GHz is placed close to any of the USB3.0radiation channels, it will pick up the broadband noise.

Thus it will affect the SNR (signal-to-noise ratio) and limit the sensitivity of any wireless receiver. 2. All electronic products will have some radiation. The radiation is diverging in the for move electromagnetic waves. When the electromagnetic frequency of this radiation is just about the same as the operating frequency range of wireless devices–2.4Ghz, it will interfere with wireless devices.
Thank you for purchasing the Camgeet KVM Switch.
We are here to help you!
Do you need assistance setting up your product?
Email-Consult candy_us@163.com for technical support.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>