Newstone K01 Wireless Karaoke Speaker User Manual

Newstone K01 Wireless Karaoke Speaker

Product Specifications

• Compliance: Part 15 of FCC Rules
• Radiation Exposure Limits: FCC approved for uncontrolled environment
• Minimum Distance: 0cm between radiator and body

Product Usage Instructions

Installation

1. Ensure the device is placed in a suitable location with proper ventilation.
2. Connect the necessary cables according to the provided diagram in the user manual.
3. Power on the device and follow the initial setup instructions on the screen.

Frequently Asked Questions

Q: Can I modify the device without voiding the warranty?
A: Any changes or modifications not approved by the manufacturer may void the warranty and affect the device’s operation.

Q: What should I do if I experience interference?
A: If you encounter interference, try repositioning the device or adjusting its settings to minimize external disruptions.

Operation manual

Function Introduction

1. Short Press once for volume reduction,Long press to switch to previous song
2. Manual Switch Play mode, Bluetooth/TF card/U disk,etc.
3. Short Press once to add volume,Long press to switch to the next song.
4. Short Press to switch the LED lighting effcet,Press and hold for 2 seconds to switch off the LED light effect
5. Long perss 3 seconds to turn on/off,short press play/pause,double click to turn on/off couplets.
6. Short Press to turn on/off sound cancellation.
7. Long press three seconds to switch the microphone on and off,short perss once to mute the microphone.
8. Short Press microphone volume to add,double click reverb to add.
9. Short Press mic volume to reduce, double click reverb to reduce.
10. Short Press to cancel the original sound open/close,long press to switch the magic sound.
11.  The Microphone Indicator Light, the unconnected blue light flickers,the connected blue light is always on,the red light is on when charging, the red light is off when full.
12. Microphone Type-C 5V charging port.
13. Headphone jack.
14. TF slot, insert MP3 audio class file automatically switch to TF mode.
15. Audio Tyoe-C 5V charging port.
16. USB plue-in with MP3 audio class files automatically switch to USB mode.
17. Audio Indicator Light,blue light flicker when not connected,blue light will be on when connected successfully,red light will be on when charging,red light will be off when full.

Product information

• Product name:WIRELESS KAPAOKE SPAKER

• Battery:High Performance High Capacity

• Product Model:K01 Lithium battery

• Implementation Standard:GB-T9254.1-2021

• OUTPUT POWER:5W

• Charging voltge:DC5V

• Frequency range:90Hz-18KHz

• Input Signal:42DB

• Power mode:DCcharging and built-in Battety

Main functions

• High reduction electro-acoustic system
• 3.7V high performance battery
• Sound penetration,wide coverage
• Super MP3 audio decoding technology
• All digital audio processing, clear voice quality,  high sensitivity

Schematic diagram of charging connection

Frequently asked questions

1. If the indicator light does not turn on,please check whether the audio power is sufficient, or to connect the audio to 5V/1A power supply for charging,charging time is about 3 to 4 hours.
2. There is no sound in the microphone. The power supply is not on,the mode is not correct,or the volume is not adjusted.Please adjust the volume of the microphone.
3. If the stereo does not have reverb, the reverb switcha may be off, please turn on the reverb switch.
4. If the microphone is noisy,it may be due to ambient noise, signal interference, microphone too close to the speaker, etc., please re-adjust the direction of the microphone.
5. If Bluetooth playback is interrupted, it may be because the Bluetooth is too far away,or there is an obstacle between the phone and the loudspeaker,affecting the signal transmission, please close to the connected phone,avoid the obstacle.
6. lf Bluetooth can not be connected,it may be because the dustabce is too far,there are obstacles, or by other phones connected, please close to the phone to avoid obstacles,disconnect the phone
7. If you can not charge,check whether the charger is normal, audio charging, the charging port of the red light is on.

Service and warranty Warranty terms and conditions

1. If the product has any function problem,can enjoy the warranty service, the warranty period is 12 months.
2. Manmade damage, broken, artificial scratches,no warranty card is not within the scope of the warranty.
3. Customer must fill in all necessary information(such as customer’s name, address,telephone number, date of purchase,etc.)
4. We are responsible for the maintenance costs incurred during the warranty period.We are not responsible for the freight and other costs incurred during the warranty period.
5. warranty services need to have a warranty card and according to the requirements of the operation can be guaranteed, otherwise no warranty. 6. This product conforms to the regulations and technical standards of the People’s Republic of China.

FCC Warning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference e to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>