GYS Mode 3 EV Charging Cable User Guide
- June 3, 2024
- GYS
Table of Contents
GYS Mode 3 EV Charging Cable
TYPE 1 (SAE J1772 North American standard) 8 Chevrolet Volt, Citroen C-Zero, Fisker Karma, Ford Focus Electric, Ford C-Max Energi, Mia, Mia Electric Van,Mitsubishi-1 Miev, Mitsubishi Outlander Phev, Nissan NV200 SE Van, Nissan Leaf, Peugeot Ion, Renault Fluence,Renault Kangoo, Smiths Edison Van, Smiths Newton, Tata lndica Vista EV, Toyota Prius, Vauxhall Ampera.
Specification
SAE J1772 to IEC 62196-2 Male Plug
- Colour: Black
- Certificate: TUV, CE
- Current: 16A/32A
- Length: Sm (16.4ft)
- Cable: Straight/ Coiled
- Voltage Range: 230V±10%
- Warranty: 2 Years
- Service Life: >50000 times
- Weight: 2.5-3kg
- Withstand Voltage : 2000V
- Insulation Resistance: >l000MO
- Terminal Temperature rise: <SOK
- Material: ABS(plug)+TPU(cable)
- Working Temperature: -40°c~+so•c
- Sealing gasket: rubber or silicon rubber
- Vibration Resistance: Meet JDQ53.3 requirements
- Contact Pin: Ccp per alloy,silver or nickel plating
Good to know
- This is a Mode 3 EV charging cable only for EVs with Type 1/ Type 2 inlets. Don’t use it for EVs with other types of inlets
- Do not use the charging cable if the device is damaged
- Please follow the user manual to use this device
- Don’t use it in the water
- Please do not open up any part of the device by yourself. Please do not disconnect while the charging box is working
- This product is only for EV charging. Please don’t use it for any other affair, including hauling, binding, and so on
- This cable has a complicated internal structure. Any questions, please contact our Customer Service Manager at first time. Please do not take it apart without any professional technical support.
Security Protection
- Warning and indicator functions
- Short-circuit protection
- Output overcurrent protection
- Input under voltage protection
- over temperature protection
- Ground protection
- Input overvoltage protection
- Charge status detection
Key Features
- Plug into the charging station outlet
- Plug into the car charging port
About Maintenance
- In order to ensure the normal service life of the charger and reduce the risk, maintenance must be performed within the specified maintenance of the equipment needs to be completed by professionals, with use of qualified and safe maintenance tools.
- The product is carefully packed in the factory. During transportation, strong impacts and bumps should be avoided to prevent damage to the outer packaging of the product.
- The product should be placed at an ambient temperature of -40°C~+50°C with a relative humidity of less than 95%. The ambient air should not contain acids, alkalis or other corrosive gases and explosive gases, It also should be away from rain, snow, wind, and sand.
TYPE 2 (IEC 62196-2 EU European standard) Audi A3 e-Tron, BMW i3, BMW i8, Chevrolet Spark, Mercedes B Class E-Celi, Mercedes 5500 PHEV, Mercedes SLS EV, Mercedes Vito E-Cell Van,Porsche Panamera S PHEV, Renault Zoe, Renault Zoe 2013,Volkswagen e-Up,Volkswagen e-Golf, Volvo VG0 PHEV.
Specification
IEC 62196-2 Female to Male Plug
- Colour: Black
- Certificate: TUV, CE
- Current: 16A/32A
- Length: Sm (16.4ft)
- Cable: Straight/ Coiled
- Voltage Range: 230V±10%
- Warranty: 2 Years
- Service Life: >50000 times
- Phase: Single / Three(Only for straight cable)
- Weight: 2.5-3kg
- Withstand Voltage: 2000V
- Insulation Resistance: >lO00MO
- Terminal Temperature rise: <SOK
- Material: ABS(plug)+ TPU(cable)
- Working Temperature : -40°c~+so•c.
- Sealing gasket: rubber or silicon rubber.
- Vibration Resistance : Meet JDQS3.3 requirements.
- Contact Pin: Copper alloy, silver or nickel plating.
Good to know
- This is a Mode 3 EV charging cable only for EVs with Type 1/ Type 2 inlets. Don’t use it for EVs with other types of the inlet.
- Do not use the charging cable if the device is damaged
- Please follow the user manual to use this device
- Don’t use it in the water
- Please do not open up any part of the device by yourself. Please do not disconnect while the charging box is working
- This product is only for EV charging. Please don’t use it for any other affair, including hauling, binding and so on
- This cable has a complicated internal structure. Any questions, please contact our Customer Service Manager at first time. Please do not take it apart without any professional technical support.
Security Protection
- Warning and indicator functions
- Short-circuit protection
- Output overcurrent protection
- Input under voltage protection
- Over temperature protection
- Ground protection
- Input overvoltage protection
- Charge status detection
Key Features
About Maintenance
- In order to ensure the normal service life of the charger and reduce the risk, maintenance must be performed within the specified me; the maintenance of the equipment needs to be completed by professionals, with the use of qualified and safe maintenance tools.
- The product is carefully packed in the factory. During transportation, strong impacts and bumps should be avoided to prevent damage to the outer packaging of the product.
- The product should be placed at an ambient temperature of -40°C~+50°C with a relative humidity of less than 95%. The ambient air should not contain acids, alkalis or other corrosive gases and explosive gases, It also should be away from rain, snow, wind, and sand.
MANUFACTURER
Nanjing Shenqi Electronic Technology Co., Ltd. +86-025-8662-3210 2nd floor, Building 03, Tiexin Bridge, Nanjing. China o (Please do not contact the manufacturer’s telephone for after-sales questions).
Read User Manual Online (PDF format)
Loading......