PERLESMITH PSSS1 Height Adjustable Speaker Stands Instruction Manual
- June 9, 2024
- Perlesmith
Table of Contents
PERLESMITH PSSS1 Height Adjustable Speaker Stands
Support
Thank you for choosing this PERLESMITH product! At PERLESMITH we strive to
provide you with the best quality products and services in the industry.
Should you have any issues, please don’t hesitate to contact us at
Technical Support: 1-800-556-6806
Mon-Fri 8am – 8pm(CST)
Other Info:
supportus@perlesmith.com (US）
supportca@perlesmith.com (CA)
UNPACKING INSTRUCTIONS AND IMPORTANT SAFETY INFORMATION
- Carefully open the carton, remove contents and lay out on cardboard or other protective surface to avoid damage.
- Check package contents against the Supplied Parts and Hardware List to assure that all components were received undamaged. Do not use damaged or defective parts.
- Not all parts and hardware included will be used. lf you require replacement parts, please contact our Technical Support line at 1-800-556-6806 or customer service at supportus@perlesmith.com (US)/ supportca@perlesmith.com (CA).
- Carefully read all instructions before attempting installation.
- If you do not understand the instructions or have any concerns or questions, please contact our Technical Support line at 1-800-556-6806 or customer service at supportus@perlesmith.com (US)/supportca@perlesmith.com (CA).
- This product may contain moving parts. Use with caution.
- Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
Tools Needed
- Phillips Screwdriver
Contents
Hardware Kit
Assembly
STEP 1 Attach the nails or rubber pads to the base feet
For carpets floor,screw the nails into the holes of the base.
For marble or wooden floor, rotate and
insert the rubber pads into the holes of the base.
STEP 2A Fasten the post assemblies to the bases(for regular lower height)
STEP 2B Fasten the post extensions and post assemblies to the bases(for
extra higher height)
The plastic packaging bag of the posts and bases come with yellow and blue
labels. ONLY assemble the posts and base labelled THE SAME COLOR. Otherwise it
will be difficult to assemble.
STEP 2B-1 Secure the post assemblies [03] to the post extensions [02]
STEP 2B-1 Fasten the post extensions [02] and post assemblies [03] to bases [01]
STEP 3 Adjust post assemblies to the desired height
STEP 4 Secure speaker to stand
Speaker option A: two thread inserts
Note: The washers [K] are only suitable for bolts [J] and [H]
Speaker option B1: keyhole insert
- Insert bolt [F] through 90 degree plate [04]
- Thread plastic nut [E] to bolt [F]
- Insert bolt [F] into keyhole and fasten the plastic nut [E]
- Use the washer [P] to adjust the length of the bolt [F] if necessary.
Speaker option B2: keyhole insert
(Suitable for Samsung SWA-8500S, SWA-9000S Speakers)
- Slide the washer [O] into the bolt [M], then insertSlide the washer [O] into the bolt [M], then insert them into the keyhole.them into the keyhole.
- Tighten the nut [N] until the washer [K] is pulledTighten the nut [N] until the washer [K] is pulled firmly against the 90 degree plate [04].firmly against the 90 degree plate [04].
Speaker Option C: Thread holes located at the bottom of the speaker
STEP 5 Route the cables
All of us at PERLESMITH do appreciate your product purchase. We hope that you
are as happy with your product as we designing and manufacturing it for you.
We strive to provide you with the best quality products and services in the
industry.
Thank you again for choosing this PERLESMITH product!
FAQs
What is the difference between the PSSS1 and the PSSS2?****
The PSSS2 has a more robust base and is capable of supporting up to 50 lbs.
What is the weight capacity of the PSSS1?****
The PSSS1 can support up to 20 lbs.
What is the difference between the PSSS1 and the PSAS1?****
The PSAS1 has a wider base but can support up to 30 lbs.
Can I use this product with my computer speakers?****
Yes, this product can be used with computer speakers. However, please note that computer speakers are usually not designed for use with high-end audio equipment. If you are using this product with your computer speakers, you may experience some distortion or other sound quality issues. If you have any concerns or questions about your computer speaker system, please contact our Technical Support line at 1-800-556-6806 or customer service at supportus@perlesmith.com (US)/supportca@perlesmith.com (CA).
What is the best height for speaker stands?****
The speaker stands should bring the speaker to a height such that the tweeter is at roughly ear level. This means a stand height of between typically 24-28”. The stand itself should be rigid and have a base area large enough so that the speaker will not easily tip over.
Does speaker stands reduce vibration?****
“The loudspeaker generates sound pressure which can make wooden floors vibrate. Platforms and stands keep those vibrations from getting back to the speaker – which is important for their performance.
Does speaker stands affect the sound?****
Much more than simply a bit of furniture to raise your speakers to the correct height stands play an incredibly significant role in the overall sound quality, providing your speakers of choice with the perfect environment to operate. The difference in sound clarity and accuracy can truly be night and day.
What are the characteristics of a good speaker stand?****
Weight rating, construction materials, top plate construction, base and feat, height, and cable management capabilities should all be considered when shopping for speaker stands.
How much sand do you put in speaker stands?****
Some speakers will only need a half-full stand, some will need it full to the brim, and some will only need three-quarters or two-thirds. A hollow stand means it’s possible to make up for where your speakers lack.
How much should I spend on speaker stands?****
Typically you can expect to spend between 20 and 30% of your speaker purchase price on appropriate stands.
What is the best material to fill speaker stands?****
I use sterilized play sand from the home club. Easy to fill the stand with, doesn’t make noise when it vibrates and is cheap. Use the sterile stuff so no weeds grow! Sand is good.
What sand to use for speaker stands?****
Filling Audio Bastion Silica Sand into your speaker stands will improve the performance even more. The extra weight provides a solid foundation for your speakers by minimizing the vibrations.
Video – How to Assembly
Download The PDF Link;PERLESMITH Height Adjustable Speaker Stands pdf
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>