PERLESMITH PSTVS03 Table Top TV Stand Instruction Manual
- June 4, 2024
- Perlesmith
Table of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Weight Restrictions
- Check the VESA Pattern of TV before the Installation
- Tools Needed [Not Included]
- Supplied Parts and Hardware
- Supplied Parts and Hardware for Step 1
- Supplied Hardware for Step 2
- Supplied Parts and Hardware for Step 3
- Supplied Parts and Hardware for Step 4
- Supplied Part for Step 5
- Supplied Hardware for Step 7 (Optional)
- Step 1 Assemble the Base
- Step 2 Connect the Upper Support Pillar [02a] to Lower Support Pillar
- Step 3 Assemble the TV Plate
- Step 4 Secure the TV Brackets to a TV
- Step 5 Attach TV to the TV Plate and Manage the Wires
- Step 6 Swivel Adjustment
- Step 7 Secure the Safety Rope with TV Stand against Wall (Optional)
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
PERLESMITH PSTVS03 Table Top TV Stand
Thank you for choosing this PERLESMITH product! At PERLESMITH we strive to provide you with the best quality products and services in the industry. Should you have any issues, please don’t hesitate to contact us at
IMPORTANT SAFETY INSTRUCTIONS
Please carefully read all instructions before attempting installation. If you do not understand the instructions or have any concerns or questions, please contact our customer service at supportus@perlesmith.com.
CAUTION: Avoid potential personal injuries and property damage! Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We are not liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
Weight Restrictions
If your TV weighs more, this TV stand is NOT compatible.
WARNING
DO NOT exceed the maximum weight indicated. This TV stand is intended for use only within the maximum weights indicated. Use with products heavier than the maximum weights indicated may result in failure of the TV stand and its accessories, causing possible damage and or injury.
Check the VESA Pattern of TV before the Installation
Minimum VESA pattern: 200mm/8 in(W) x 100mm/4 in(H)
If your TV VESA is greater than 600×400 mm/24×16 in or less than VESA 200x100mm/8×4 in, this TV stand is NOT compatible.
If this TV stand is NOT compatible, please contact customer service at supportus@perlesmith.com to find a compatible product.
Tools Needed [Not Included]
Supplied Parts and Hardware
WARNING: This product contains small items that could be a choking hazard
if swallowed.
Before starting assembly, verify all parts are included and undamaged. Do not
use damaged or defective parts. lf you require replacement parts, please
contact our customer service at
supportus@perlesmith.com.
- Please note: Not all hardware included in this package will be used.
Supplied Parts and Hardware for Step 1
Supplied Hardware for Step 2
Supplied Parts and Hardware for Step 3
Supplied Parts and Hardware for Step 4
Supplied Part for Step 5
Supplied Hardware for Step 7 (Optional)
Step 1 Assemble the Base
Step 2 Connect the Upper Support Pillar [02a] to Lower Support Pillar
[02b]
Step 3 Assemble the TV Plate
Step 4 Secure the TV Brackets to a TV
**Select TV Bolts**
Only one bolt size fits your TV.
Bolt length: Verify adequate thread engagement with bolt or bolt/spacer
combination. We recommend thread engagement by at least 5 turns.
-Too short will not hold the TV.
-Too long will damage the TV.
Please Note: The provided TV bolts meet most of today’s TVs design.
However, some TVs require special bolts which may not be in the hardware bag.
In this case we offer our “PSUHP” Universal Hardware Kit which provides a
large selection of bolts that can meet the demand of older and unique
applications.
Please Note: When using the spacers it is important to note that they can
be used in multi-layers (meaning stacked). If you have any difficulty
understanding how to install the TV bolts or spacers, please contact customer
service at supportus@perlesmith.com.
Option A (For Flat Back TV)
Option B (For Round Back TV)
Option C (For TV with A “Bump”)
Spacers may be necessary for 2 holes ONLY.
Option D
For cable interference or inset holes, use spacers [TV8], [TV9] and [TV10] to create extra space between the TV and TV brackets
Step 5 Attach TV to the TV Plate and Manage the Wires
TV brackets are three-height-adjustable.
You can choose the proper height.
Step 5-1 Hang the TV with brackets to the TV plate
Step 5-2 Push the bottom of the TV to TV plate
Step 5-3 Insert the safety lock [J] into the upward facing hooks at the midway
to lower part of the TV bracket. Please note this is where the lower part of
the TV bracket meets the TV plate. Then tighten the bolts of the safety lock
[J] until the bolts touch the TV plate
Step 5-4 Manage the wires
Step 6 Swivel Adjustment
If necessary,the TV plate or TV can be swivelled manually
Step 7 Secure the Safety Rope with TV Stand against Wall (Optional)
Technical Support:
(US/CA)1-800-556-6806 Mon-Fri 8am –
8pm(CST)
(UK)44-808-196-3891 Mon-Fri 2pm – 10pm(UTC)
Other Info: supportus@perlesmith.com
Website: www.perlesmith.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>