PERLESMITH PSTVS01-1 Table Top TV Stand Instruction Manual
- June 4, 2024
- Perlesmith
Table of Contents
PERLESMITH PSTVS01-1 Table Top TV Stand
Thank you for choosing our product! We strive to provide the best quality and services for our customers. For any parts inquiries, please contact AV Supply Group as below: New Zealand: New Zealand P 64 9 2749172 E info@avsupply.co.nz Australia: P 61 3 9071 4585 E info@avsupplygroup.com.au
IMPORTANT SAFETY INFORMATION
- Please read through these instructions completely before attempting installation. If you do not understand the instructions or have any concerns or questions, please contact customer service.
- Check package contents against Supplied Parts and Hardware List to assure that all components were received undamaged. Do not use damaged or defective parts. If you require replacement parts, contact customer service.
- Not all parts and hardware included will be used.
- Do not use this product for any purpose or in any configuration not explicitly specified in this instruction. We hereby disclaim any liability for injury or damage arising from incorrect assembly or incorrect use of this product.
Supplied Parts and Hardware
Hardware for Attaching TV Brackets to TV
Step 1 Connect the Base Plates to Junction Plates
Step 2 Connect the TV Brackets
Step 3 Secure the Bracket on the Holder According to Your Height Choice
There are two choices of height adjustment. You can choose the appropriate height choice while securing the TV bracket on the holder.
Step 4 Secure the TV Brackets on TV
Bolt length: Verify adequate thread engagement with bolts or bolts/spacers combination.
- Too short will not hold the TV.
- Too long will damage the TV.
Option A (For Flat Back TV)
Option B {For Round Back TV)
Note: Put the bracket at the proper position for the VESA holes .
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>