PERLESMITH Mobile TV Cart PSTVMC04 Instruction Manual

June 6, 2024
Perlesmith

PERLESMITH LOGO

Mobile TV Cart Instruction Manual
V5.0PERLESMITH Mobile TV Cart PSTVMC04 -FIGURE Model:PSTVMC04

Thank you for choosing this PERLESMITH product! At PERLESMITH we strive to provide you with the best quality products and services in the industry. Please share your experience of our product with others at www.perlesmith.com/pages/reviews if you are satisfied. Should you have any issues, please don’t hesitate to contact us.
Technical Support:
1-800-556-6806 Mon-Fri 10am – 5pm (PST) (USA) (CAN)
Other Info:
supportus@perlesmith.com (US)
supportca@perlesmith.com (CA)

PERLESMITH Mobile TV Cart PSTVMC04 -QRhttps://www.perlesmith.com
Website: www.perlesmith.com

Important Safety Information

  • Please read through these instructions completely before attempting installation. If you do not understand the instructions or have any concerns or questions, please contact customer service at supportus@perlesmith.com (US)/supportca@perlesmith.com (CA)
  • Check package contents against Supplied Parts and Hardware List to assure that all components were received undamaged. Do not use damaged or defective parts. lf you require replacement parts, contact customer service at supportus@perlesmith.com (US)/supportca@perlesmith.com (CA)
  • Not all parts and hardware included will be used.
  • Do not use this product for any purpose or in any configuration not explicitly specified in this instruction. We hereby disclaim any liability for injury or damage arising from incorrect assembly, incorrect mounting, or incorrect use of this product.
  • Please check www.perlesmith.com for more products and company information.

Tip-Over Warning

  • Serious or fatal crushing injuries can occur from tip over. To help prevent tipping over:
  • Never allow children to climb, stand, hang, or play on any part of the TV or TV cart.
  • Use tip over restraint or anchor to attach the TV cart to the wall.
  • Use of tip-over restraints may only reduce, but not eliminate the risk of tip-over.

Check the VESA Pattern of Your TV before the Installation

PERLESMITH Mobile TV Cart PSTVMC04 -FIGURE 1| 100 mm ≈ 4 in.
300 mm ≈ 11 3/4 in.
200 mm ≈ 7 7/8 in.
400 mm ≈ 15 3/4 in.
---|---

Minimum VESA pattern: 100mm/4 in.(W)x100mm/4 in.(H)

If your TV VESA is greater than 400×400 mm/16×16 in. or less than VESA 100x100mm/4x4in., this TV cart is NOT compatible.
If this TV cart is NOT compatible, please contact customer service at supportus@perlesmith.com (US)/supportca@perlesmith.com (CA) to find a compatible product.

Tools Needed (Not included)

PERLESMITH Mobile TV Cart PSTVMC04 -FIGURE 2

Supplied Parts And Hardware

Supplied PartsPERLESMITH Mobile TV Cart PSTVMC04 -FIGURE
3

Hardware for Assembling the TV CartPERLESMITH Mobile TV Cart PSTVMC04
-FIGURE 4

Hardware for Attaching TV Brackets to TVPERLESMITH Mobile TV Cart
PSTVMC04 -FIGURE 5

Step 1 Secure Wheels to the Square TubesPERLESMITH Mobile TV Cart
PSTVMC04 -FIGURE 6

Step1-1
Turn this nut to adjust the height of the wheel [03]PERLESMITH Mobile TV
Cart PSTVMC04 -FIGURE 7

Step1-2
Secure wheels [03] to the square tubes [01] and [02] by using the provided wrench [H]PERLESMITH Mobile TV Cart PSTVMC04 -FIGURE 8

Step 2 Secure Wheels to the Square Tubes
PERLESMITH Mobile TV Cart PSTVMC04 -FIGURE 9Secure the square tubes [01] and [02] to the tube connector [03] using M6x60mm bolts [A] and socket plate [B]PERLESMITH Mobile TV Cart PSTVMC04 -FIGURE
10

Step 3 Secure the Poles [06] and [09] to the BasePERLESMITH Mobile TV
Cart PSTVMC04 -FIGURE 11

  1. Attach tube connector cover [05] to the tube connector [04].
  2. Secure the lower pole [06] to the tube connector [04] upper using M6x10mm bolts [C] and Allen key [F].
  3. Insert the pole cover [08] into the top of the pole [09].
  4. Thread the pole connector [07] to the top of the lower pole [06]. Thread the pole [09] to the pole connector [07].

Step 4 Secure Shelf [10] to Pole [06]PERLESMITH Mobile TV Cart PSTVMC04
-FIGURE 13

**4.1**Secure shelf supports [11] to the shelf [10] using M6 nuts [E]PERLESMITH Mobile TV Cart PSTVMC04 -FIGURE 14

**4.2**Secure shelf support connecting plate [12] to the pole [06] using M6x10mm bolts [C]PERLESMITH Mobile TV Cart PSTVMC04 -FIGURE
15

**4.3**Secure shelf [10] to the shelf support connecting plate [12] using M6x10mm bolts [C]PERLESMITH Mobile TV Cart PSTVMC04 -FIGURE
16

Step 5 Secure Square Plate to Upper Pole [09]PERLESMITH Mobile TV Cart
PSTVMC04 -FIGURE 17

5.1 Slide the square plate connector and rubber pad [13] over the top of the pole [09] and secure the connector using Small Allen Key [F].PERLESMITH
Mobile TV Cart PSTVMC04 -FIGURE 18

5.2 Secure the square plate [14] to square plate connector [13] using M6x10mm bolts [C] and M6 washers [D].PERLESMITH Mobile TV Cart PSTVMC04
-FIGURE 19

Step 6 Secure the Brackets to the TV

Note: The bolts are shown in accordance with the actual sizePERLESMITH
Mobile TV Cart PSTVMC04 -FIGURE 21

Note: The washers and spacers are shown in accordance with the actual size

|
---|---
PERLESMITH Mobile TV Cart PSTVMC04 -FIGURE 24

Select TV BoltsPERLESMITH Mobile TV Cart PSTVMC04 -FIGURE
25

Bolt length: Verify adequate thread engagement with bolts or bolts/spacers combination.
We recommend thread engagement by at least 5 turns.
-Too short will not hold the TV.
-Too long will damage the TV.PERLESMITH Mobile TV Cart PSTVMC04 -FIGURE 27

Please Note: The provided TV bolts meet most of today’s TVs design. However, some TVs require special bolts which may not be in the hardware bag. In this case, we offer our “PSUHP” Universal Hardware Kit which provides a large selection of bolts that can meet the demand of older and unique
applications.
Please Note: When using the spacers it is important to note that they can be used in multi-layers (meaning stacked). If you have any difficulty understanding of how to install the TV bolts or spacers, please contact customer service at supportus@perlesmith.com (US) / supportca@perlesmith.com (CA).

PERLESMITH Mobile TV Cart PSTVMC04 -FIGURE 28

CAUTION: Ensure the TV brackets **15**are EQUALLY CENTERED on your  TV AND securely fastened in place.

Option A (For Flat Back TV)PERLESMITH Mobile TV Cart PSTVMC04 -FIGURE
29

Option B (For Round Back TV)PERLESMITH Mobile TV Cart PSTVMC04 -FIGURE
30

Option C (For TV with A “Bump”) Spacers may be necessary for 2 holes ONLY.PERLESMITH Mobile TV Cart PSTVMC04 -FIGURE 31

Option D
For cable interference or inset holes, use spacers to create extra space between the TV and TV bracketsPERLESMITH Mobile TV Cart PSTVMC04 -FIGURE
32

Step 7 Hang TV to TV Plate [15] 7-1 Hang the TV with brackets to the TV plate
7-2 Push the bottom of the TV to the TV platePERLESMITH Mobile TV Cart
PSTVMC04 -FIGURE 33

Step 8 Secure TV to TV Plate [15] Tighten the safety bolt on the bottom of the TV brackets to secure TV to the square plate.PERLESMITH Mobile TV
Cart PSTVMC04 -FIGURE 34

Step 9 Cables Management

PERLESMITH Mobile TV Cart PSTVMC04 -FIGURE 35| PERLESMITH Mobile TV Cart PSTVMC04 -FIGURE 36
---|---
PERLESMITH Mobile TV Cart PSTVMC04 -FIGURE 37

Thank you again
for choosing this PERLESMITH product!PERLESMITH Mobile TV Cart
PSTVMC04 -FIGURE 38

All of us at PERLESMITH do appreciate your product purchase. We hope that you are as happy with your product as we designing and manufacturing it for you. We strive to provide you with the best quality products and services in the industry. Please share your experience of our product with others at www.perlesmith.com/pages/reviews if you are satisfied. If you have any questions please don’t hesitate to contact us at

Technical Support:
1-800-556-6806 Mon-Fri 10am – 5pm (PST) (USA) (CAN)
Other Info:
supportus@perlesmith.com (US)
supportca@perlesmith.com (CA)

Please check
www.perlesmith.com
for more products and company information.https://www.perlesmith.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals