JONATHAN Y MRE-6001 LED Lighted Mirror User Guide

June 9, 2024
JONATHAN Y

JONATHAN Y MRE-6001 LED Lighted Mirror User Guide
JONATHAN Y MRE-6001 LED Lighted Mirror

IMPORTANT

PLEASE READ THE INSTRUCTIONS BEFORE SET UP AND INSTALLATION.

Components Parts and Fittings

  • Mirror
    Parts Of Description

  • Screw & Wall plug x 4 (Included in pack)

  • Wire nut x 3 (Included in pack)

Suggested Tools:

  • Screw driver

  • Drill

Safety Warning

Safety

  • We suggest you spend a short time reading the instruction leaflet
  • Carefully check that you have all the parts before beginning assembly.
  • Keep small parts and fittings out of children’s reach and keep children well away from construction area, as the unassembled product contains small parts, which could present a choking hazard.
  • We suggest you retain these instructions for future reference.
  • This appliance can be used by adults ONLY.
  • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Caution

  • In order to avoid overheating, do not cover the mirror.
  • Switch off the mains supply and remove the appropriate fuse or switch off the appropriate circuit breaker before commencing installation
  • Make sure that there is no danger that the cord or extension cord is inadvertently b epulled or cause anyone to trip when in use.

Assembly/User Instruction

Please read all instructions carefully. Before you proceed to install. make sure that the power supply is turned off and remains off until installation is complete.

Please note that each part has been assigned a number and proceed in a numerical order.

Step 1: Mark The position of the hang
Tools Required

Step 2: Fix the screw
Tools Required

Step 3: Connect to the main supply
Tools Required
Assembly Instruction

Step 4: Hang up the Mirror on the wall
Tools Required

Installation Dimension

Dimensions
Dimensions

Can adjust three kinds of color temperature. Press once to change color temp. and on-off. Press and hold switch for dimming the lumens.

MODEL| A(inch)| B(inch)| C(inch)| D(nch)| E(nch)| F(inch)| Cobr Temperature| LED Length(inch)| Drive Wattage
---|---|---|---|---|---|---|---|---|---
MIR102A-27R| 27| 27| 20.6| /| 1| 1| 4200K/6400K/3001K| 83.9| 72w

Jonathan Y Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

JONATHAN Y User Manuals

Related Manuals