LaMetric TIME SA8 Wi-Fi Clock for Smart Home User Guide

LaMetric TIME SA8 Wi-Fi Clock for Smart Home

Gift Box

SAFETY SYMBOLS

SAFETY INSTRUCTIONS

Read and follow these instructions to ensure the safe installation and functioning of the device.

WARNINGS:

• Use the device only indoors.
• Use the device only in dry locations.
• This device is not suitable for children.
• Do not use the device where directly exposed to water, risk of electric shock.

OPERATING INSTRUCTIONS:

• This device is not a toy designed to be played with by children.
• Do not place the device on hot surfaces.
• For safety reasons, do not open the device, which will also void a warranty.
• Only use the adaptor supplied; using a different adapter can damage the device.
• Do not clean the device when it is on and connected to the power supply.
• To avoid scratching clean only with a dry cloth duster, do not use abrasives or solvents. Avoid liquids on all electrical parts.
• Do not use cleaning agents to clean the device.
• Manage in accordance with disposal laws in your area.
• Wireless frequency band: 2.4 GHz
• Operation temperature: 0-35 °C
• Relative humidity: 30-50%

Reset

Setup

| |
---|---|---

Clock Faces

Apps

Notifications

Spotify

Speaker

Internet Radio

LIMITED WARRANTY

https://www.lametric.com/legal/warranty

FCC COMPLIANCE STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications to this product not authorized by Smart Atoms Limited could void the electromagnetic compatibility (EMC) and wireless compliance and negate your authority to operate the product.

This product has demonstrated EMC compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, television sets, and other electronic devices.

Exposure to radio frequency energy. The radiated output power of this device meets the limits of FCC/IC radio frequency exposure limits. This device should be operated with a minimum separation distance of 20 cm (8 inches) between the equipment and a person’s body.

EU DECLARATION OF CONFORMITY

https://www.lametric.com/doc

LIMITED WARRANTY

|

EU DECLARATION OF CONFORMITY

---|---
|

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

Smart Atoms Limited
78 York Street
London
W1H 1DP, UK

@getlametric
www.lametric.com
support@lametric.com

References

• Go LaMetric | LaMetric
• Connected clock for a Smart Home | LaMetric TIME
• LaMetric Products - CE - Google Drive
• Warranty | LaMetric

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>