Toolit BTW6-12V Car Battery Tester Instruction Manual
- May 15, 2024
- Toolit
Table of Contents
Toolit BTW6-12V Car Battery Tester
OVERVIEW
Technical Specifications
- Model: BTW 6/12 V
- Compatible Battery Types: 6V and 12V
- Supported Battery Standards: Motorcycle battery, regular lead-acid battery, AGM flat battery, AGM spiral battery, GEL battery
- CCA Current Range: 10 to 2000
Product Usage Instructions
Connection
Connect the red clamp to the positive battery terminal and the
black clamp to the negative battery terminal. The LED on the tester
will turn red.
Operation of the Application
- Download the software via the QR code located on the first page of the manual and open the application.
- The logo will turn blue, indicating that the device is connected. The LED on the tester will also turn blue.
- For automatic connection: After the initial connection is successful, the link is made automatically as soon as the application is opened and the tester is connected to a battery (>4.5 V).
- To set up a different battery, press the button on the top right of the screen. The Battery Management window will open, listing all added batteries. Touch to create a new battery.
- Enter the necessary details such as name, voltage rating, battery type, standard, and CCA current value between 10 and 2000.
- Select the battery to be tested by tapping on it from the list.
Battery Test
Before performing a test, ensure that the engine is switched off. The
Battery Test consists of 4 different checks:
- Touch the battery test icon to start the test.
- Follow the on-screen instructions for each check.
- Review the results displayed on the screen.
- Take necessary action based on the test results.
OPERATION OF THE APPLICATION
Download the software via the QR code located on the first page of this manual, and open the application.
Connecting to Bluetooth
On first use, click on in the upper left corner of the screen; the icon is grey, which indicates that no device is connected
Touch «KONNWEI» to connect.
The logo will turn blue, indicating that the device is connected. The LED on
the tester will also turn blue.
Automatic connection: After the initial connection is successful, the
link is made automatically as soon as the application is opened and the tester
is connected to a battery (>4.5 V).
Setting up a different battery
- Press the button on the top right of the screen.
- The Battery Management window will open. It will list all the batteries that have already been added.
Touch to create a new battery.
The model, type, standard, capacity, and starting current are usually indicated on the battery label.
- Enter the name, voltage rating, and location of the battery.
- Battery type: motorbike battery, regular lead-acid battery, AGM flat battery, AGM spiral battery, GEL battery.
- Battery standard: Check the battery standard.
- Enter the CCA current value between 10 and 2000.
- Then click on UPDATE to finish.
Selecting the battery to be tested
Tap the battery that you want to test from the list. The icon shows which
battery is currently selected
BATTERY TEST
Touch the icon and start the battery test by pressing «TEST».
WARNING: Before performing a test, ensure that the engine is switched off.
The Battery Test consists of 4 different checks:
- Battery health test
- Battery CCA test
- Battery internal resistance test
- Battery voltage and state-of-charge test
WAVEFORM
Monitoring the battery voltage waveform.
Touch the icon and start the battery test by pressing START.
START-UP TEST
Touch the icon and start the battery test by pressing TEST.
Follow the instructions to get the results.
WARNING: The car’s engine must be started during testing.
ALTERNATOR TEST
Testing the battery charging system.
WARNING: Do not switch off the engine during the load test.
Share the battery test report
At any time during a test, touch to access the sharing window.
The results of the test can then be shared by email:
- as a screenshot.
- in text format.
You can share all test reports by selecting «Setting» and then «Share Report».
WARRANTY CONDITIONS
The warranty covers any defects or manufacturing faults for two years from the date of purchase (parts and labor).
The warranty does not cover:
- Transport damage.
- Normal wear and tear of parts (e.g.: cables, clamps, etc).
- Damage due to misuse (incorrect power supply, damage caused by dropping equipment, dismantling).
- Environmental failures (pollution, rust, dust).
In the event of a failure, please return the appliance to your distributor with:
- Proof of purchase (receipt, etc.)
- A description of the reported fault
QR SCAN
FAQ
Frequently Asked Questions
- Q: How do I know if my battery needs replacement?
- A: If the test results show low voltage, low CCA value, or other irregularities, it may indicate that your battery needs replacement. Consult a professional if unsure.
- Q: Can I test both 6V and 12V batteries with this tester?
- A: Yes, this tester is compatible with both 6V and 12V batteries.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>