SERVER SBH-1 Squeeze Bottle Holder Instruction Manual
- June 11, 2024
- SERVER
Table of Contents
SERVER SBH-1 Squeeze Bottle Holder Instruction Manual
Thank You
for purchasing our squeeze bottle holder. Its contoured lid and open-frame
design keep cold air circulating, yet contained—holding bottles of dressings
and sauces up to 10° F colder than in pans.
SERVE BETTER WITH COLDER SQUEEZE BOTTLES
Squeeze Bottle Holders
MODEL SBH-1 86828
SINGLE Fills the space of 1 /6 size pan. Includes 1 squeeze bottle.
MODEL SBH-2 86829
DOUBLE Fills the space of 1 /6 size pan. Includes 2 squeeze bottles.
MODEL SBH-3 86831
TRIPLE Fills the space of 1/6 size pan. Includes 3 squeeze bottles.
MODEL SBH-6 87045
SEXTUPLE Fills the space of 1/3 size pan. Includes 6 squeeze bottles. (Holder
without bottles: 87042)
MODEL SBH-8 86974
OCTUPLE Fills the space of 1/3 size pan. Includes 8 squeeze bottles.
FOR FAST SWITCH-OUT..
Be sure to have extra squeeze bottles on hand.
Order part number 86818 16 oz TableCraft® Bottle
Safety
According to food and safety regulations, most foods must be stored and/or served at certain temperatures or they could become hazardous. Check with local food and safety regulators for specific guidelines. Server Products, Inc. cannot be responsible for the serving of potentially hazardous product.
Be aware of the product you are serving and the temperature the product is required to maintain. Server Products, Inc. can not be responsible for the serving of potentially hazardous product.
The squeeze bottles included are not intended for heated applications.
IMPORTANT
Clean, rinse, sanitize, and dry parts daily or regularly to comply with local
sanitization requirements.
Cleaning
- WASH all parts with dishwashing detergent and hot water.
- RINSE all parts thoroughly with clear water.
- SANITIZE all parts according to local sanitization requirements. All parts in contact with food must be sanitized.
- AIR DRY all parts fully.
YES!
Use dishwashing soap and hot water
- Squeeze bottles are low-temperature dishwasher safe
- Do not use abrasive, caustic or ammonia based cleansers.
- Do not use cleansing agents with high concentrations of acid, alkaline or chlorine.
- Do not use metal scrapers or cleaning pads that could scratch surfaces.
Care of Stainless Steel
This holder is constructed of stainless steel— one of the best materials for food serving and storage.
If you notice corrosion beginning on any stainless steel surface, you may need to change the cleansing agent, sanitizing agent, or the cleaning procedures you are using.
- A mildly abrasive nylon or brass brush may be used to remove any stubborn food or mineral deposits on interior surfaces of unit.
- Fully rinsing and drying all parts can help prevent corrosion. Elements and minerals in tap water can accumulate on stainless steel parts and create corrosion.
- Do not use abrasive, caustic or ammonia based cleansers.
- Do not use products containing acids, alkalines, chlorine, or salt. These agents can corrode stainless steel.
- Do not use metal scrapers or cleaning pads that could scratch surfaces.
SERVER PRODUCTS LIMITED WARRANTY
This Server product is backed by a two-year limited warranty against defects in materials and workmanship. See Server-Products.com for details.
GENERAL SERVICE, REPAIR OR RETURNS
Before sending any item to Server Products for service, repair, or return, contact Server Products customer service to request a Return Authorization Number. Merchandise must be sent to Server Products with this number. Service is extremely prompt. Typically, units are repaired and ship out within 48 hours of receipt. Merchandise being returned for credit must be in new and unused condition and not more than 90 days old and will be subject to a 20% restocking charge.
NEED HELP?
Server Products Inc. 3601 Pleasant Hill Road Richfield, WI 53076 USA Chat with
us! [email protected]
262.628.5600 I 800.558.8722
Please be prepared with your Model, P/N and Series located on the lid or base
of the unit.
