LIGHTPRO Oberon Lo 190P Staande Lamp User Manual
- June 9, 2024
- LiGHTPRO
Table of Contents
LIGHTPRO Oberon Lo 190P Staande Lamp
PRODUCT DESCRIPTION
The Lightpro Oberon is a standing LED lamp for outdoor use. The fixture can be mounted on a solid surface or placed in the ground with the supplied spikes. This product may only be used as outdoor lighting in combination with the Lightpro 12-volt system. Any alterations made to the product may have consequences for the safety, guarantee and correct functioning of the product and/or other parts of the system.
SPECIFICATIONS
- Product Lightpro Oberon Lo / Hi
- Article number 190P / 191P
- Light source LED 4W AC/DC 12V
- Power 4W
- Luminous flux 40 – 400 lm
- Light colour 3.000K
- Average lifetime 25.000
- Dimensions (H x Ø) 420 / 660 x 64 mm
- Protection class IP44
- Ambient temperature -20 °C to 50 °C
- Cable length 1m
- Dimmable Yes
- Replaceable light source N0
PACKAGING CONTENT
- Fixture Oberon Lo/Oberon Hi
- Ground spike
- Screw
- Screw
- Plug
- Lightpro connector
- Hex key
Check if all parts are present in the packaging. For questions about parts, service, and any complaints or other remarks, you can always contact us. E-mail: info@lightpro.nl.
INSTALLATION
Remove the screws [8] from the fixture [1] using the included hex key [7]. Haal de voet [9] uit het armatuur [1]Remove the base [9] from the fixture [1].
- OPTION 1: Placement in the ground Fasten the spikes [2] to the base [9] with the included screws [3]. Place the base [9] in the fixture [1]. Put the screws [8] back in the fixture using the hex key [7]. Place the fixture in the ground.
- OPTION 2: Placement on a fixed underground Mount the base [9] on the underground using the included screws [4]. If necessary, drill holes in advance and use the included plugs [5]. Place the fixture [1] on the base [9].
Put the screws [8] back in the fixture using the hex key [7].
OPERATION OF THE DIMMER
Unscrew the head [10] and remove it from the fixture [1]. Set the desired brightness using the push button on the underside of the head [10]. The brightness can be adjusted to 6 different levels. Put the head [10] back in the fixture [1] and fasten it.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>