LIGHTPRO Tiga DL 209S Wall Light User Manual
- June 9, 2024
- LiGHTPRO
Table of Contents
LIGHTPRO Tiga DL 209S Wall Light
Thank you for purchasing the Lightpro Tiga DL.
This document contains the required information for correct, efficient and
safe use of the product. Consult the general manual of the Lightpro 12-volt
system and the user manual of your transformer for more information about the
set up and connection of your light plan.
Read the information in this manual carefully before using the product. Keep
this manual near the product for consultation in the future.
PRODUCT DESCRIPTION
The Lightpro Tiga DL is a standing LED lamp for outdoor use. The fixture can
be mounted on a solid surface
or placed in the ground with the supplied spikes.
This product may only be used as outdoor lighting in combination with the
Lightpro 12-volt system. Any alterations made to the product may have
consequences for the safety, guarantee and correct functioning of the product
and/or other parts of the system.
SPECIFICATIONS
- Product Tiga DL
- Article number 209S
- Light source LED 5W AC/DC 12V
- Power 5W
- Luminous flux 75 lm
- Beam angle 90º
- Light colour 3.000K
- Average lifetime 25.000
- Dimensions (D x W x H) 88 x 68 x 63 mm
- Protection class IP67
- Ambient temperature -20 °C to 50 °C
- Cable length 1,5m
- Dimmable Yes
- Replaceable N0
PACKAGING CONTENT
- Fixture Tiga DL
- Ground spike
- Screw
- Plug
- Fixing clip
- Hex key
- Screw for mounting clip
- Lightpro connector
Check if all parts are present in the packaging. For questions about parts,
service, and any complaints or other remarks, you can always contact us.
E-mail: info@lightpro.nl.
INSTALLATION
Option 1: Mounting to the wall.
-
Remove the screw [7] from the ground spike (2) using the Allen key (6).
-
Mount the retaining clip (5) to the wall using the screw (3).
Note: The clamping part of the clip should face upwards. -
The Tiga DL (1) can now be installed, as desired, as an Uplight or Downlight by sliding it over the retaining clip in the correct way.
Option 2: Positioning in the ground.
- Attach the retaining clip (5) to the ground spike (2) using the screw (7). Use the Allen key (6)
- Slide the ground spike with the mounted retaining clip (2) to the Tiga DL (1).
- Push the fixture into the ground.
DIM FUNCTION
Press the button to set the desired light output (6 possibilities).
Dimmable: Yes, in 6 steps with built-in dimmer
TECHMAR B.V. | CHOPINSTRAAT 10 | 7557 EH HENGELO | THE NETHERLANDS |
WWW.LIGHTPRO.NL
INFO@LIGHTPRO.NL
UK Authorised Representative (for authorities only) ProductIP (UK) Ltd.
8, Northumberland Av. London WC2N 5BY
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>