LiGHTPRO 212D Onyx 20 Decking Light User Manual
- June 9, 2024
- LiGHTPRO
Table of Contents
LiGHTPRO 212D Onyx 20 Decking Light
Thank you for purchasing the Lightpro Onyx 20. This document contains the information required for the correct, efficient, and safe use of the product. Please consult the user manual of your transformer for more information on how to set up and connect your light plan, or visit our website: www.lightpro.nl.
Before using the product, please read the information in this manual carefully. Keep this manual with the product for future reference.
PRODUCT DESCRIPTION
The Lightpro Onyx 20 is an LED spot for outdoor use. The fixture can be
installed in a fixed underground.
This product may only be used as outdoor lighting in combination with the
Lightpro 12volt system. Any alterations made to the product may have
consequences for the safety, guarantee, and correct functioning of the product
and/or other parts of the system.
SPECIFICATIONS
- Product Lightpro Onyx 20
- Article number 212D
- Light source LED 0,25W 1 lm 2700K
- Power (max.) 0,25W
- Luminous flux 1 lm
- Light colour 2700K
- Average lifetime 25.000
- Dimensions (H x Ø) 33 x 20 mm
- Protection class IP67
- Ambient temperature 20° C to 50°C
- Cable length 1m
- Dimmable No
- Replaceable N0
PACKAGING CONTENT
[Figure A]
- Fixture Onyx 20
- Lightpro connector
Check if all parts are present in the packaging. For questions about parts,
service, and any complaints or other remarks, you can always contact us.
E-mail: info@lightpro.nl
INSTALLATION
[Figure B]
- Drill a hole (Ø20mm) in the underground.
- Place the fitting in the drilled hole.
The system
INSTALLATION OF THE LIGHTS
- Install the products in the desired position and lay the cables so they can be comfortably connected to the transformer or main cable.
- If products are provided with a drain hole for water, this hole must be pointing downwards.
- Use noncorrosive fixing materials (supplied as standard) if you want to bolt the products down.
- Connect the lights to the main cable by using the connector as shown in figure on page 3.
- Consult the manual of your transformer for more information.
SAFETY
-
Always fit this product so that it can still be accessed for servicing or maintenance. This product must not be permanently embedded or bricked in.
-
Turn off the system by pulling the plug of the transformer from the socket for maintenance.
-
Regularly clean the product with a soft, clean cloth.
Avoid abrasives that can damage the surface. -
Clean products with stainless steel parts with a stainless steel cleaning agent once per six months.
-
Do not use a high-pressure washer or aggressive chemical cleaning agents when cleaning the product.
This can cause irreparable damage. -
Protection class III: this product may only be connected to safety extralow voltage up to a maximum of 12 Volt.
-
This product is suitable for outside temperatures of: 20 to 50 °C.
-
Do not use this product in areas where combustible gases, fumes or liquids may be stored.
The product meets the requirements of the applicable EC, UK and EAEU
guidelines.
For questions about parts, service, any complaints or other matters, you can
contact us at any time.
Email: info@lightpro.nl
Discarded electrical equipment must not be put in the household waste. If
possible, take it to a recycling company. For details of recycling, contact a
municipal waste processing company or your dealer.
5 year warranty – visit our website at lightpro.nl for warranty conditions.
TECHMAR B.V. | CHOPINSTRAAT 10 | 7557 EH HENGELO | THE NETHERLANDS | WWW.LIGHTPRO.NL
+31 (0)88 43 44 517 | INFO@LIGHTPRO.NL | WWW.LIGHTPRO.NL
UK Authorised Representative
(for authorities only)
ProductIP (UK) Ltd.
8, Northumberland Av.
London WC2N 5BY
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>