PERLESMITH PSTVS15 Universal TV Stand Instruction Manual

PERLESMITH PSTVS15 Universal TV Stand

Thank you for choosing this PERLESMITH product! At PERLESMITH we strive to provide you with the best quality products and services in the industry. Should you have any issues, please don’t hesitate to contact us at

Technical Support

(US/CA)1-800-556-6806 Mon-Fri 8am – 8 pm(CST)
(UK)44-808-196-3891 Mon-Fri 2 pm – 10 pm(UTC)
Other Info: supportus@perlesmith.com
Website: www.perlesmith.com
Manufacturer: BESTQI INNOVATION(HONGKONG)TECHNOLOGY CO., LIMITED Address: RM21 UNIT A 11 /F TIN WUI IND BLDG NO 3 HING WONG ST TUEN MUN NT HONGKONG

IMPORTANT SAFETY INSTRUCTIONS

Please carefully read all instructions before attempting installation. If you do not understand the instructions or have any concerns or questions, please contact our customer service at supportus@perlesmith.com.
CAUTION: Avoid potential personal injuries and property damage! Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We are not liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.

Weight Restrictions

If your TV weighs more, this TV stand is NOT compatible.

WARNING

DO NOT exceed the maximum weight indi­cated. This TV stand is intended for use only with the maximum weights indicated. Use with products heavier than the maximum weights indicated may result in the failure of the TV stand and its accessories, causing possi­ble damage and/ or injury.

Check the VESA Pattern of TV Before the Installation

Minimum VESA pattern: 1 OOmm/ 4in(W) x 1 OOmm/ 4in(H)
If your TV VESA is greater than 400 x 400mm/16 x 16in or less than VESA 100 x 100 mm/4 x 4in, this TV stand is NOT compatible.
If this TV stand is NOT compatible, please contact customer service at supportus@perlesmith.com to find a compatible product.

Tools Needed [Not Included]

Supplied Parts and Hardware

WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. Do not use damaged or defective parts. If you require replacement parts, contact our customer service at supportus@perlesmith.com.
PLEASE NOTE: Not all hardware included in this package will be used.

Supplied Parts and Hardware

STEP 1

STEP 2

Step 3

Spacers [if needed]

NOTE: The spacers are shown in actual size

Step 4

Assemble the Base

Step 1-1  Place foot pad [F] on the bottom of the tempered glass [01] in the corners.
NOTE: Kindly note that the tempered glass base is designed to show the shiny glass side facing up

Step 1-2 Attach the support pillar [02] to tempered glass base [01] using plastic cover [03], plastic washers [C], steel washers [D], bolts [B] and Allen key [I]

Connect the TV Plate to Support Pillar

Connect TV plate to support pillar by using bolt [E], steel washer [D] and M6 nut [A].

Attach the wire clips [H] to support pillar [02]

Secure the TV Brackets To a TV

Select TV Bolts

Only one bolt size fits your TV.

Bolt length: Verify adequate thread engagement with bolts or bolts/spacers combination. We recommend thread engagement by at least 5 turns.

• Too short will not hold the TV.
• Too long will damage the TV.
  

PLEASE NOTE: The provided TV bolts meet most of today’s TVs design. Howev­er, some TVs require special bolts which may not be in the hardware bag. In this case we offer our “PSUHP” Universal Hardware Kit which provides a large selection of bolts that can meet the demand of older and unique applications.
PLEASE NOTE: When using the spacers it is important to note that they can be used in multi-layers (meaning stacked). If you have any difficulty understanding how to install the TV bolts or spacers, please contact customer service at supportus@perlesmith.com.

CAUTION: Ensure the TV brackets [06] are EQUALLY CENTERED on your TV and securely fastened in place.
NOTE: The bolt-hole locations on your TV may vary in accordance of the manufacturer’s design of the TV. We are only illustrating possible locations of the bolt holes.

Option A (For Flat Back TV)

Option B (For Round Back TV)

Option C (For TV with A “Bump”)

Option D

For cable interference or inset holes, use spacers [TVS], [TV9] and [TV1 O] to create extra space between the TV and TV bracket

Step 4 Attach TV to the TV Plate and Manage the Wires

TV brackets are two-height-adjustable. You can choose the proper height.

Step 4-3 Insert the safety lock [G] into the upward-facing hooks at the midway to lower part of the TV bracket. Please note this is where the lower part of the TV bracket meets the TV plate. Then tighten the bolts of the safety lock [G] until the bolts touch the TV

Step 4-4 Manage the wires

FAQs

How to put the TV on the stand?****

Please refer to the instruction manual.

How to assemble the TV stand?****

Please refer to the instruction manual.

How to disassemble the TV stand?****

Please refer to the instruction manual.

How to adjust the TV stand?****

Please refer to the instruction manual.

Is there any problem when I move my TV stand?****

No, there is no problem. You can move your TV stand easily.

How to measure for a TV stand?****

Measure the distance from the floor to the average sightline of viewers in your home to determine the ideal height for your TV stand. Subtract half of the TV’s height from that amount once you get it. Your TV stand should only be a few millimetres off from the difference.

Are all TV stands the same?****

Make sure the stand you select can support your new flat-screen TV by making sure it is solid, long, and deep. Ensure that your TV won’t protrude past the front or back of the TV stand. Take into account your personal design philosophies as well.

Does TV stand size matter?****

Keep in mind that choosing the proper size TV stand for your device is about more than just looks. A significant safety concern might arise when a large TV is set up on a stand that is the same size as or less than the TV’s frame.

How deep should a TV stand be?****

Ideal base height is 36 inches, and a media cabinet with a depth of 20 to 24 inches is a nice place to store your TV box, play station, and other TV accessories.

Do Universal TV stands work for all TVs?****

Because it won’t fit all televisions, the Vivo universal stand isn’t truly universal. According to the specifications, it can support televisions with a size range of 22 inches to 65 inches and has a weight restriction of 110 pounds.

What is another name for a TV stand?****

A piece of furniture intended to contain consumer electronic components and appliances, such as televisions, is referred to as an entertainment centre (or centre).

How do I know if my TV stand will hold my TV?****

The weight of the TV increases with its size. The maximum weight that a mount can support as well as a number of VESA standards that are compatible will be listed. The mount should have no trouble supporting the weight of your TV as long as your monitor is within the specified parameters.

Video

Download PDF Link;PERLESMITH PSTVS15 Universal TV Stand Table Top

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>