Q-TRAN HINGE Adjustable Light Fixture Bracket Installation Guide

Q-TRAN HINGE Adjustable Light Fixture Bracket

NOTES

• Not recomended for use with flexible encapsulated fixtures
• Compatible with MICRO 5 rigid fixtures
• Compatible with extrusions with lens
• Compatible with rigid encapsulated fixtures
• Mount to drywall with drywall anchors or mount to wood surface

INCLUDED PARTS

• Assembled bracket
• 3/4″ long mounting screw(s)
• 6-32 x 1/4” undercut flat head mounting clip screw
• Allen key 5/64″ (for HMB-S & HMB-M) or 3/32″ (for HMB-L & HMB-XL)

TOOLS & HARDWARE NEEDED

• Drywall anchors (if mounting to drywall)
• Screw driver
• Measuring tape

INSTALLATION

HMB-S
FOR MICRO 5 SERIES OR SMALL FIXTURES

1. Remove HMB-S from bag. Loosen side screws with 5/64 fallen wrench and rotate inner bracket to reveal mounting hole.
2. Screw down base bracket with provided screw or equivalent.
3. Install fixture mount clip with provided SS #6 flat head screw from bag.
4. Snap fixture onto bracket. Rotate inner bracket to desired angle then tighten side screws to lock angle.

NOTE: Screw can only be installed once so make sure correct position is configured. Do not over torque. Hand tighten until firm.

HMB-M
FOR LIGHT-WEIGHT LINEAR FIXTURES

1. Remove HMB-M from bag. Loosen side screws with 5/64 fallen wrench and rotate inner bracket to reveal mounting hole.
2. Screw down base bracket with provided screw or equivalent.
3. Install fixture mount clip with provided SS #6 flat head screw from bag.
4. Snap fixture onto bracket. Rotate inner bracket to desired angle then tighten side screws to lock angle.

NOTE: Screw can only be installed once so make sure correct position is configured. Do not over torque. Hand tighten until firm.

HMB-L
FOR HEAVY LINEAR FIXTURES

1. Remove HMB-L from bag. Loosen side screws with 3/32 allen 2 wrench and rotate inner bracket to reveal mounting hole.
2. Screw down base bracket with provided screw or equivalent.
3. Lower down by pushing anchor in arrows direction. Lock by pushing in opposite direction.
4. Install fixture mount clip with provided SS #6 flat head screw from bag.
5. Snap fixture onto bracket. Rotate inner bracket to desired angle then tighten side screws to lock angle.

NOTE: Screw can only be installed once so make sure correct position is configured. Do not over torque. Hand tighten until firm.

HMB-XL
FOR HEAVY LINEAR FIXTURES & ANGLE HEIGHT CONTROL

1. Remove HMB-XL from bag. Loosen side screws with 3/32 allen 2 wrench and rotate inner bracket to reveal mounting hole.
2. Screw down base bracket with provided screw or equivalent.
3. Lower down by pushing anchor in arrows direction. Lock by pushing in opposite direction.
4. Install fixture mount clip with provided SS #6 flat head screw from bag.
5. Snap fixture onto bracket. Rotate inner bracket to desired angle then tighten side screws to lock angle.

NOTE: Screw can only be installed once so make sure correct position is configured. Do not over torque. Hand tighten until firm.

HMB-XL
FIELD MOUNT AND CUSTOM INSTALL FEATURES

CUSTOM CUTS – Field cuttable to smaller lengths

CUSTOM FIXTURE MOUNT

PRE-SET ANGLES FOR HMB-L & HMB-XL

1ST NOTCH

2ND NOTCH

3RD NOTCH

4TH NOTCH

© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com

References

• Your Name as Your Email | Hover Realnames
• LED Lighting Systems, Linear LED Lights, LED transformers | Q-Tran

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>