Q-Tran QZ-DMX 24V LED Driver Instruction Manual
- May 15, 2024
- Q-TRAN
Table of Contents
Q-Tran QZ-DMX 24V LED Driver
Specifications
- Model: QZ-DMX 96W
- Mounting: Vertical or Horizontal
- Power: 96W
- Channels: 1, 2, 3, or 4
InstallationMounting The QZ-DMX can be mounted either vertically or horizontally using the supplied screws and mounting tabs on the bottom of the enclosure.
Ensure to mount the QZ into a stud for sufficient support, using either the center holes or the slots of each mounting tab.
Spacing When installing multiple QZ power supplies, separate the enclosures by at least 3 units of space from edge to edge to prevent the rise of ambient temperature between the power supplies.
Wiring Refer to the provided wiring diagram for connecting the power supply to light fixtures. Use a single multiconductor cable for wiring from the power supply to the light fixture.
FAQ
- Q: Can I mount the QZ-DMX horizontally?
- A: Yes, the QZ-DMX can be mounted either vertically or horizontally.
- Q: How should I space multiple QZ power supplies during installation?
- A: Ensure to separate the enclosures by at least 3 units of space from edge to edge to prevent temperature rise between them.
- Q: What type of cable should I use for wiring from the power supply to light fixtures?
- A: Use a single multiconductor cable for wiring from the power supply to the light fixture.
Product Parts
- Must be installed by a licensed electrician.
- Installation must be in accordance with DMX512-A standard
- DMX Shield must be grounded to Earth Ground at a single point external to the power supply
QZ Components
- Driver Compartment
- Wiring Compartment
- Mounting Tab Slots
- Mounting Tab Holes
Installation Instruction
Mounting
The QZ-DMX can be mounted either vertically or horizontally, utilizing the
supplied screws and the mounting tabs on the bottom of the enclosure
The QZ must be mounted into a stud for sufficient support, using either the
center holes or the slots of each mounting tab
When installing multiple QZ power supplies, seperate the enclosures by 3” of
space from edge to edge. This prevents the rise of ambient temperature between
the power supplies.
Wiring diagram **
**
QZ-DMX 96W
2024 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 |
References
- Your Name as Your Email | Hover Realnames
- LED Lighting Systems, Linear LED Lights, LED transformers | Q-Tran