Q-TRAN VERS Linear Fixtures Installation Guide

June 3, 2024
Q-TRAN

VERS Linear Fixtures
Installation Guide

VERS Linear Fixtures

Wiring DetailsQ-TRAN VERS Linear Fixtures - fig SCREW FOR CONCEALED CLIP

4 x 5/8” flat head screw

CONCEALED CLIP INSTALL

  1. Using the #4 x 5/8” flat head screws, mount the concealed clip. The first and last clip should be placed 4” inward from each end of the VERS.Q-TRAN VERS Linear Fixtures - Featured Image
    NOTE: 2 clips provided for 4’ or less; 4 clips provided for greater than 4’

  2. Mount the VERS fixture by snapping onto the concealed clips.Q-TRAN VERS Linear Fixtures - fig 2 NOTE: The VERS makes a secure connection with the concealed clip by tilting and snapping on.

ASSEMBLEDQ-TRAN VERS Linear Fixtures - fig 3 SCREW FOR MAGNETIC MOUNT ACCESSORY

6 flat head screw

MAGNET INSTALL

  1. Using the #6 flat head screws, mount two screws into the 12” magnet bracket through the slotted holes at each end.Q-TRAN VERS Linear Fixtures - fig 4
  2. Unscrew the CLS VERS endcap using the supplied allen key, and slide in the magnet clips.Q-TRAN VERS Linear Fixtures - fig 5 NOTE: 1 magnet clip needed per foot.
  3. Using the supplied set screws fasten the CLS endcap that was removed, and secure the magnet clips into your desired location.Q-TRAN VERS Linear Fixtures - fig 6 NOTE: The magnet clips should be offset to the flat heads used to secure the bracket, to maximize magnetic connection.
  4. Drop the assembled VERS fixture into the mounted magnet bracket, the bracket should sit within the extrusion as pictured below.Q-TRAN VERS Linear Fixtures - fig 7

MAGNET INSTALL
COVE INFO
The VERS magnet install requires a .925” cut out to be recessed (The magnet bracket should be centered in the millwork).Q-TRAN VERS Linear Fixtures -
fig 7 NOTE: Height of millwork for recessed VERS should be based off the product specific dimensions found on the cutsheet.
NOTE: For magnet installations requiring seismic precautions, monofiliment may be used with magnet clip as pictured below.
NOTES:
Field modifications must comply with Q-Tran’s installation methods otherwise warranty is null and void

© 2022 Q-Tran Inc. All rights reserved
155 Hill St. Milford, CT 06460
203-367-8777
sales@q-tran.com
 www.q-tran.com
Specification subject to change. Rev-05-11-22

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals