FLEXISPOT E4B Standing Desk with Dual Motor User Manual
- June 14, 2024
- FLEXISPOT
Table of Contents
FLEXISPOT E4B Standing Desk with Dual
**Motor User Manual**
Specifications
Assembly Notes
Product List
Accessory Package
Note: The following line drawings are for reference only and in some cases may
be different from the actual part; please refer to the actual part. If you
find missing parts or have installation problems, please contact customer
service.
Parts Included
Assembly Steps
Step1: Install the support beam and bracket
Step2: Install the Column
Step3: Install the feet
Step4: Install the Adapter Arm
Step5: Install Tabletop, Handset, Control box and Adapter
Step6: Connect cables to the control box
Keypad User Guide
Operation Guide
- Press the UP button or DOWN button to lift or lower the height of desk surface. The LED display shows the real time value. The range of the height value: 24.4″ – 50″.
• Saving A Height Position
a. Press the UP button or DOWN button to lift or lower the height of desk
surface. For instance, you adjust the height to 29.5″.
b. Press “M” SAVE button and the LED display shows”S- “, then press “1” to
save the 1st height position to 75 cm. The LED display shows “5-1 “.
c. Repeat step a and step b to save the 2nd height position to 39”. The LED
display shows “5-2 “. Save the 3rd height position to 47”. The LED display
shows “5-3 “.
d. Press “1”, “2”,”3″, to automatically reach the height saved before.
• Long-Time Sitting Reminder
a. Press REMINDER button “A” to activate the function. The LED display shows
“ON”
b. Two seconds later, press the “ ” or “ ” button to adjust the reminder time
only when the display screen flashes. Then press any button to save the time
setup, or wait 5 seconds and system will save the time setup automatically.
After time setting is finished, the system will automatically enter the
countdown, during the countdown, any operation will lead to a repeat starting
of the timer. When the countdown finishes, the buzzer will be active with a
10-second “DiDi. .. DiDi. .. DiDi. .. ” tone.
c. Within the 10-second reminder buzz, press any button to reactivate the time
countdown that is set up in (b) step. If no operation during the 10-second
reminder buzz, there will be another reminder buzz after 5 minutes. No
operation during the second buzz will turn o ffthe Long-Time Sitting Reminder.
d. Press and hold the “A” button for three seconds to turn o ffthe Long-Time
Sitting Reminder. The LED display shows “OFF”.
• Adjust the sensitivity of anti-collision
a. Keep pressing “ ” and “ ” button at the same time for 5 seconds to switch
the sensitivity between level 1, 2, 3.
b. When the display shows “A-1”, it means in low sensitivity, “A-2” means
middle sensitivity, “A-3” means high sensitivity and “A-0” means function OFF.
c. Anti-collision means when an obstruction is detected while up or down
moving, the desk will stop automatically and move to the opposite direction
for a short distance.
• Reset function and Troubleshooting
a. Reset function definition : When LED display shows RSr “, press and hold
the “button until the
desk reaches its lowest height and rebound to stop and display shows the
lowest height, reset process finished.
b. When exception code occurred E01 or E02, please retry 18 mins later.
c. If the ‘ ” button doesn’t work, please check the cable connection and then
cut o ffthe power for at least 10 seconds. Reconnect to the power and press “
” button and LED display shows” RSr’, then start the reset process by pressing
“ ” button.
After you try all those ways without resolving it, please contact the customer
service.
Resolving Common Issues
This list is used for checking and solving common faults and errors. Please contact the manufacturer if problem you encounter is not on the list below.
Attention
-
Power supply: AC100 – 240 V, frequency 50/60HZ;
-
Working environment: 32°F – 1 04° F;
-
Before cleaning, you have to unplug the power supply cable. Clean with a slightly damp cloth to wipe away the surface dust. Keep all electrical components away from liquids. Do not damage the connection line and keep the plug in a safe position.
-
Inside the control box, there are electronic components, metal parts, plastic parts, wires and so on.
They should be disposed in accordance with the local laws and regulations. They cannot be disposed as household waste. -
Before using the product, please make sure the product has been installed correctly.
-
Before starting use of the product, please read the instructions to fully understand all the product’s functions and settings.
-
Keep children away from electric height-adjustable desks, control units and handsets.
Manufacturer is not responsible of any damages that result from children’s unpredictable behaviour. -
Slight noise caused by the multi wedge belt or brake system will not impact the use of this product.
-
Do not use corrosive or abrasive materials to clean this product and please dispose of cleaning solutions in an environmentally friendly manner.
-
Understand the risks associated with using this product. Children or those with cognitive impairment should not use this product without supervision.
-
If the power supply cord is damaged or broken, it must be replaced by the manufacturer or a relevant specialist to avoid any injuries.
-
Please operate in a clean and safe environment. For example, do not left around your tools. And always be careful to deal with packaging materials, in order to avoid any kinds of possible danger. Potential chocking risk exists when children play with plastic bags!
-
If necessary, retain the original package for future transportation.
Recycling and Disposal
This product cannot be disposed of as household waste. To prevent damage to the environment, this product should be recycled. Please use the relevant recycling systems available to you or contract the distributor or manufacturer for recycling assistance.
FlexiSpot Limited Warranty
This limited warranty offered by FlexiSpot covers defects in material or workmanship in new FlexiSpot products. This warranty extends to the original purchaser only and is non-transferable. Only consumers purchasing FlexiSpot products from authorized FlexiSpot retailers or resellers may benefit from our limited warranty.
What is Covered?
The FlexiSpot limited warranty covers our products against defects in material or workmanship as follows:
-
FlexiSpot Height Adjustable Desk Frames
All height-adjustable desks purchased on or after October 5, 2016 include a 5-year warranty for the frame, and a 3-year warranty for the motor, controller and switch, electronics and other mechanisms. -
FlexiSpot Sit-Stand Desktop Workstations
All standing desks purchased on or after October 5, 2016 include a 5-year warranty for the frame, medium-fiber desktop and mechanisms. -
FlexiSpot Desk Bikes
All desk bikes purchased on or after October 5, 2016 include a 3-year warranty for the frame, and a 1-year warranty for the electronics and other mechanisms. -
FlexiSpot Mini Steppers
All desk bikes purchased on or after October 5, 2016 include a 1-year warranty fer the frame, and other mechanisms -
Accessories
All monitor mounts purchased on or after October 5, 2016 include a 5-year warranty for the arms, 3-year warranty fer gas spring system and mechanisms.
What are your Remedies?
FlexiSpot will replace at no charge to the consumer the defective parts only or, at FlexiSpot’s option, replace any product or part of the product that is defective because of improper workmanship and/or material, under normal installation, use, service and maintenance. If FlexiSpot is unable to provide a replacement and repair is not practical or cannot be completed in a timely fashion, FlexiSpot may elect to refund the purchase price in exchange fer the return of the product. In the rare event that your FlexiSpot product is defective, we will provide you with a replacement item shipped at no cost to you within the continental United States. The shipping method for replacement products is FedEx Ground, but expedited shipping is available if you choose to pay the additional expense. In additicn, you will need to pay the shipping costs if any products need to be shipped to you at an address outside the continental United States.
REPAIR OR REPLACEMENT (OR, IN LIMITED CIRCUMSTANCES, REFUND OF THE PURCHASE PRICE) AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE PURCHASER. FLEXISPOT NEITHER ASSUMES NOR AUTHORIZES ANY PERSON TO CREATE FOR IT ANY OTHER OBLIGATION OR LIABILITY IN CONNECTION WITH THIS PRODUCT.
FlexiSpot Limited Warranty
What is Not Covered?
Our limited warranty does not cover any problem that is caused by:
- Conditions, malfunctions or damage not resulting from defects in material or workmanship
- Conditions, malfunctions or damage resulting from normal wear and tear, improper installation, improper maintenance misuse abuse, negligence, accident or alteration.
- Accessories, connected materials and products, or related products not manufactured by FlexiSpot.
- Conditions, malfunctions or damage resulting from failure to follow the instructions and guidelines relating to the product’s intended use.
Our limited warranty is void if a product is returned with removed, damaged or tampered labels or any alterations (including removal of any component or external cover).
How to File a Claim?
In order to receive the benefit of our limited warranty, you need to process
your claim in compliance with the terms of this limited warranty and fellow
proper return procedure. To request warranty service, please contact customer
service via email at contact@FlexiSpot.com or toll
free at 855-421-2808. You will need to
provide the sales receipt or other evidence of the date and place of purchase
for your FlexiSpot product.
Implied Warranties and Limitation of Damages
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES
(INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE)
SHALL BE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY, AND FLEXISPOT
SHALL NOT BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL, OR CONSEQUENTIAL
DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS OF PROFITS OR REVENUE, RESULTING
FROM ANY BREACH OF EXPRESS OR IMPLIED WARRANTY OR CONDITION, OR UNDER ANY
OTHER LEGAL THEORY, EVEN IF FLEXISPOT HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. Some jurisdictions do not allow limitations on the duration of
an implied warranty or the exclusion or limitation of special, indirect,
incidental or consequential damages, so the above limitations or exclusions
may not apply to you.
Governing Law
This Warranty shall be governed by the laws of the State of California, USA,
without giving
effect any conflict of laws principles that may provide the application of the
law of another jurisdiction.
How State Law Applies
This Warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>