serenelife SLGYMBAR100BL Expandable Safly Fun Gymnastics Bar User Guide
- October 26, 2023
- serenelife
Table of Contents
serenelife SLGYMBAR100BL Expandable Safly Fun Gymnastics Bar
Jayco reviews: DO NOT BUY JAYCO | P...
Jayco reviews: DO NOT BUY JAYCO | PissedConsumer
WARNING!
Read before using
- Read the user manual thoroughly before using.
- Adult supervision required when assembling the product.
- Adult supervision required when children are using the product.
- Take care not to pinch your fingers and hands during assembly.
- Maximum weight of users of this product should not exceed 90 pounds.
- Only one person at a time can use the product.
- Do not allow children to fold the product after use.
- Only adults should fold and put out of reach of children after use.
- Children should not use it without adult supervision.
- Always check the screws before each use.
- Tighten loose screws immediately.
- Do not use if any parts are that are damaged or loose.
- Do not add, use or replace any parts that are not original.
- Do not use the apparatus for anything other than what it is designed for.
- Use of this equipment is at your own risk.
- Be sure to store it away after use to keep out of reach of children.
Expandable Safly Fun Gymnastics Bar
Adjustable Height Training Monkey Bar for Kids Safety
Warning Please read this manual carefully prior to using your new
product. Keep this manual in a safe please for easy future reference.
Parts Summary
The Main Support Poles are shipped with the Height Adjuster Poles pre- inserted. The Height Adjuster Knobs are screwed into the Main Support Poles.
Assembled Product Image
Attention!
- DO NOT completely tighten the screws while assembling the product.
- After you confirm that all parts are correctly in place, tighten all the screws.
- Prior to using each time, check all the screws to ensure that they are all tightened.
- Screws may become loose with prolonged usage. intermittently check the screws to ensure that they secure.
After use, the product folds up for compact storage (right image ).
Assembly
-
Insert the Height Adjuster Poles to the Main Top Bar. Loosen the knob . Align the screw holes and hand tighten the screws on both sides.
-
Next, fold out the Main Support Poles like the diagram.
-
Layout and align the Main Support
-
Use the screws to secure the Main Support Poles to the Bottom Stabilizer Bars like the diagram.
-
Insert the assembled Horizontal Bar and Height Adjuster Pole unit into the top of the Main Support Poles . Next, tighten the Height Adjuster Knob into a screw groove at the
desired height. (see diagram) -
Finally, adjust the bottom of both Main Support Poles to the point of where it is just barely above the surface.
Make sure that the bottom of the adjuster is not touching the floor surface. It should not be higher than the Bottom Stabilizer Bars. If adjusted tightly to the floor it may seem unstable and rocky. The support pole is like a fulcrum but when in use, the weight should be on the outer Bottom Stabilizer Bars so as not to rock.