Q-TRAN UX8 DMX Controller Installation Guide
- June 3, 2024
- Q-TRAN
Table of Contents
Q-TRAN UX8 DMX Controller
INSTALLATION Accessories – UX8
-
Install the junction box into the wall.
-
Use a flathead screwdriver to pry the baseplate as shown:
-
Screw the baseplate to the junction box in the wall firmly.
-
Connect all components and put the power adapter into the junction box. Connect DMX GND to earth GND.
-
Snap the upper portion of the touch panel into the baseplate and then snap the bottom into place.
-
Program the zones.
© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com
References
- Your Name as Your Email | Hover Realnames
- LED Lighting Systems, Linear LED Lights, LED transformers | Q-Tran
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>