Hisense ES-G2007X3-1 Android Smart TV User Guide

: June 5, 2024
: Hisense

Hisense ES-G2007X3-1 Android Smart TV User Guide

Important Notice

Paragraphs beginning with the symbol indicate important instructions, tips or conditions for the following settings.

For your own safety and the optimal performance of your device, ensure to read the safety instructions before performing any installation.

It is not guarantee operation and performance of peripheral devices made by other manufacturers. We disclaim any liability or damage that may arise from operation and/or performance from usage of such other maker’s peripheral devices.

The recording and playback of content on this or any other device may require permission from the owner of the copyright or other such rights in that content. It is your responsibility to ensure that your use of this or any other device complies with applicable copyright legislation in your country. Please refer to that legislation for more information on the relevant laws and regulations involved or contact the owner of the rights of the content you wish to record or playback.

The Index/Glossary explains certain terms used in this user manual and in the device menu.

Read these instructions
Follow all instructions
Heed all warnings
Keep these instructions
All rights reserved.

Safety Instructions

To ensure safe and correct use of this product, always comply with the following precautions to avoid dangerous situations and damage to your unit:

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

The intended use and ambient conditions for this device

This device is intended for the rendering of video and audio signals, on a table top, in a home or office environment. It must not be used in rooms with a high level of humidity or dust concentration. The warranty is only valid if used as intended by the manufacturer.

WARNING

High humidity and dust concentration may lead to current leaks in the device. To reduce the risk of fire or electrical shock:

Do not expose this unit to rain, moisture, dripping or splashing water, and do not place objects filled with liquids, such as vases, cups, etc. on or over the unit.
Do not touch the device with wet hands.
Do not expose to direct air-conditioning and keep candles or other naked flames away from the device at all times.

If the device is moved from a cold environment to a hot environment, leave it switched off for at least an hour to avoid condensation.
If used outside, make sure it is protected from moisture.
If you notice anything unusual, immediately remove the power plug.
In case of fire, use preferably a CO2 gas or powder fire extinguisher. If such extinguishers are not accessible, try to isolate the electrical supply before using a water fire extinguisher.

Power Supply

Incorrect voltages can damage the device. Only connect this unit to a power supply with the correct voltage and frequency noted on the type plate, using the supplied power cable.

The power plug must be easily accessible so that the device can be disconnected at all time. The unit is live, even if in standby mode, as long as the unit is connected to a power outlet.
It is recommended that this unit is placed on a dedicated circuit.

Do not overload the power outlets by connect too many appliances to the same outlet. Overloaded wall outlets, extension cords, etc. are dangerous and can result in electric shock and fire.

After power off, don’t turn it on again in 5 seconds. Frequent switching power supply in a short period of time can cause abnormal device.

The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.

Power plug and power cable

Do not touch the power plug with wet hands.
Do not place heavy objects on the power cable. Route the cable so that it is not kinked or laid over sharp edges, walked on or exposed to chemicals. A power cable with damaged insulation can cause electric shock and fire.
Pull the power plug, NOT on the cable when disconnecting.
The cable can become damaged and cause a short circuit if pulled on.
Do not place the power cable near a high temperature object.
Do not move the device with the power cable plugged into a socket.
Do not use a damaged or loose power cable, or a damaged socket outlet.
Do not use any power cords other than the one supplied with this unit.

Air ventilation and high temperatures

Install your device only where there is proper ventilation, and ensure that there is at least 20 cm free space on the sides and 10 cm free space on the back unit for air circulation. Excessive heat and obstruction of ventilation could lead to fire or early failure of some electric components.

Do not block any ventilation openings with newspapers, tablecloths, curtains, etc.
Do not dry clothing etc. on top of the unit.
Take care not to touch the ventilation openings since they may become hot.
Do not insert foreign objects into the device through the vents.

Warning about off-gassing

New furniture, carpet, paint, building materials and electronics can release chemicals into the air through evaporation. After you set your device up and turn it on for the first time, you may notice a slight smell within a couple of hours. This is because some components of device are heating up for the first time. The materials that we use fully meet the environmental requirements and regulations. Your device is working just fine and the fumes from the off-gassing will diminish eventually

Supervision

Do not let children play unsupervised close to the device. It could tip over, be pushed off or pulled down from the stand surface and injure someone.
Do not allow a switched-on device to run unattended.

Volume

Loud music and noises can lead to irreversible damage to your ears. Avoid extreme volume, especially over long periods and when using headphones.

If you hear a drumming noise in your ears, turn down the volume or temporarily stop using headphones.

Thunder Storms

Pull out the power plug and all connected antenna cables from the device during a thunderstorm. Overvoltage caused by lightning strikes can damage the device via the antenna system, as well as the wall socket.

Long periods of absence

As long as the power plug is connected to a live socket outlet, the device will consume power even in standby mode. The power plug and all connected antenna cables should be disconnected out during long periods of absence.

Cleaning and care

CAUTION:
Unplug the power cord prior to cleaning the device.
Clean the device, the screen, and the remote control with a soft, moist, clean and color-natural cloth only. Do not use any chemicals.

Do not subject the surfaces to insect repellent, solvent, thinner or other volatile substances. This may degrade the surface quality.
Do not spray water or other liquids directly on the device. Liquid inside the device could lead to product failure.
The surface of the display panel is treated and may be easily damaged. Take care not to scratch it with fingernails or other hard objects.
Also wipe the power plug with a dry cloth at regular intervals.

Service/Repair

Never remove the cover/back of the device; there are no user serviceable parts inside. Refer all service to qualified service personnel.

Packaging

Keep the anti-moisture materials and plastic bags out of reach of children.
Plastic bags can cause suffocation and the anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital.

Modification

Do not attempt to modify this product in any way. Unauthorized modification could void the warranty of this unit, cause electric shock and fires.

Remote Control batteries

Incorrect installation may cause battery leakage, corrosion and explosion.
Replace only with the same or equivalent type.
Do not mix old and new batteries.
Do not mix different battery types.
Do no use rechargeable batteries.
Do not burn or break up batteries.
Be sure to dispose of batteries correctly.
Do not expose batteries to excessive heat such as sunshine, fire or the like.

Outdoor Antenna Grounding

If an outdoor antenna used, be sure the antenna system is protected against voltage surges and built-up static charges.

Disposal

Refer to the recycling section of this manual.

Laser

Do not look directly at the lens when this device is on because the laser light may damage your eyes!

This product comes with a laser module. Do not tear or modify this device in any manner; otherwise, it may result in personal injury.
Peak Power < 66.7mW
Wavelength 450nm-460nm
Angle of Divergence 49°
Class 2 Laser Product IEC/EN 60825-1: 2014

CAUTION:

use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

If this device requires a repair, please wear laser eye protection with an optical density OD that is 4 or higher and has a wave length of 445-465nm.
Do not place any water-containing vessel on this device, such as cosmetics or liquid medicine.
If any object or water enters this device, please unplug this device and contact the service staff of Hisense.
Do not place any exposed fire source (e.g. burning candle) on this device. Keep away from high temperature and heat.
Do not expose the battery to direct sunlight or candle light.
Keep air vents on both sides clear from any objects to prevent the device from overheating inside.
To avoid a short circuit, product damage or electric shock, do not use any sharp object or metal to touch the ports or other openings on the TV.
If this device has been in a warm environment, allow any built-up condensation to evaporate first BEFORE you switch the device on.
Do not allow a child to stand on or climb up this device.
Do not place any object above or in front of the lens because the laser light could cause the object to become flammable.
Clean the lens periodically with a clean cloth and make sure the TV is turned off before you start.

AC voltage: This symbol indicates that the rated voltage marked with the symbol is AC voltage

Class I product: This symbol indicates that it requires a safety connection of protective earthing (ground).

Congratulations on the purchase of your new TV! This Manual will walk you through a few easy steps to set up your TV.

Please visit Hisense official website for more details.
Product image is only for reference, actual product may vary in appearance.
Parts of the software function changes with the system upgrade.

Do not allow a child to stand on or climb up this device.
Do not place any object above or in front of the lens because the laser light could cause the object to become flammable.
Clean the lens periodically with a clean cloth and make sure the TV is turned off before you start.

Accessories List

Laser TV × 1
Remote control × 1
AAA batteries × 2
Gloves for handling the Laser TV × 2
Power cord × 1
Wrench to adjust the bottom of the TV × 1
USB extension cable × 1
Laser TV Quick Setup Guide × 1
Laser TV Warranty Card × 1
Cleaning kit for the lens × 1

NOTE: The accessories may be different from the list above due to different models, countries / regions. Please refer to the actual accessory bag.

Laser TV Diagram

Laser TV Diagram Laser TV
Diagram

We strongly recommend that two people handle this device when moving it from one place to another. Be sure to protect the lens when you handle this device.

Logo