steute STM 515-B1 Straight Actuator Instruction Manual
- June 14, 2024
- Steute
Table of Contents
// STM 515-B1, B2, B3
Mounting instructions / Actuator
Mounting / N.B.
When fixing, use washers whose diameter is larger than the rubber elements integrated in the actuator. Use the washers supplied! Do not use the actuator and the solenoid interlock for guiding or as a mechanical end stop. Before mounting on the safety guard: Join solenoid interlock and actuator. Avoid dirt on the actuator and actuating mechanism. Clean the actuator regularly. To prevent bypassing of safety guards: Monitor availability of substitute actuators. Fasten the actuator to the safety guard so that it cannot be detached! Include metallic actuators in the equipotential bonding, for example by mounting them on a metallic earthed surface.
Technical data
Actuator stainless steel
Washers stainless steel
Fixing screws 2 x M6 (strength class 10.9)
Tightening torque 8 Nm
Weight B1: approx. 55 g (without fixing
material) B2, B3: approx. 65 g (without fixing material)
Actuator types
STM 515-B1
Straight actuator
STM 515-B2
Angled actuator
STM 515-B3
Angled actuator
Actuating radii
| Actuator | Approach direction |
|---|---|
| +X/-X | +Y/-Y |
| R min (mm) | R min (mm) |
| STM 515-B1 | 600 |
| STM 515-B2 | 500 |
| STM 515-B3 | 500 |
Dimensions
STM 515-B1
STM 515-B2
STM 515-B3
Fixing dimensions / device
STM 515-B1
STM 515-B2
STM 515-B3
- Washers
steute Technologies GmbH & Co. KG,
Brückenstraße 91, 32584 Löhne, Germany,
www.steute.com
134 05 90 / 03.2023 / Index –