OPT7 V1 Quantum Rock Lights Installation Guide

OPT7 V1 Quantum Rock Lights

WHAT IN THE BOX

WHERE TO INSTALL

RECOMMENDED LOCATIONS FOR ROCK LIGHT PODS

INSTALLATION STEPS

TOOLS REQUIRED

• 5/32-inch Drill Bit
• 7/64-inch Drill Bit
• Phillips Head Screwdriver

1. Designate your mounting locations for each Rock Light Pod and t he control box. (Refer to page 2 for recommended mounting locations)
   Avoid hot surfaces and/or moving parts.

2. Use a pen to mark the holes where you want to mount the Rock Light Pods. Then, drill a 5/32” hole(s) for the wire connector to pas s through.

3. Drill a 7/64” hole for each marked hole.

4. Secure the Rock Light Pods using the included screws. (If mount ing on a rounded or uneven surface, utilize the optional rubber mounting pads.)
   Caution: Rock Light Pods become extremely hot during use – keep away from any vehicle parts that may be damaged by exposure to high temperatures.

5. Connect all Rock Light Pod lines to the control box connectors. Secure by twisting.

6. Connect the red positive line from the control box directly to the vehicle battery.

7. Ground the negative wire from the control box by connecting it to an unpainted area on your vehicle’s frame.

8. Using a fuse tap, connect the 12V control wire from the control box to a power source that turns on ONLY when the key is turned to ACC/O N or a switched fuse position.
   Some examples of these power sources are: radio, dome light or those that are marked as accessory in your owner’s manual or on your fuse box cover diagram.

The kit will not function without this connection.

If you are uncomfortable performing work of this nature yourself, then do not hesitate to consult a professional for help. Working with a vehicle’s electrical system can be hazardous to an unqualified individual. OPT7 is not liable for damages or personal injuries while installing this product. The installation guide is provided as assistance to reduce setup time.

FULL-SIZE REMOTE CONTROL BUTTON LAYOUT

1. ON & OFF

   • Only control “RGB” light

2. Dimmer +/-

   • Brightness Setting: 50 Levels

3. Color Selector

   • 20 different solid modes

4. Independent Control Of White Light
   ON & OFF
   Dimmer +/-

   • Brightness Setting: 50 Levels
     Default brightness

   • Brightness Setting: 4 Levels

5. Style Mode
   3 Color Cycle

   • Default 3 color variations (Random) Supports brightness and speed adjustment
     3 Fade

   • Default 3 color variations (Random) Supports speed adjustment
     7 Color Cycle

   • Default 7 color variations (Random)

   • Supports brightness and speed adjustment
     Beat/SoundSYNC

   • Default 20 color variations (Random)

   • Supports brightness adjustment
     Strobe

   • Default 20 color variations (Random)

   • Supports brightness and speed adjustment
     AUTO

   • Play all dynamic style modes

6. Quick/Slow

   • Speed Setting: 10 Levels

SPECIFICATIONS

• Wattage
  8W Per Pod

• Amp Draw
  8A

• 8 LEDs
  Quad-Core CREE

• Brightness
  1,600 Lumens Per Pod

• Voltage
  12V

• Resistance
  IP68 Water-Resistant (Pod Only)

• Operating Temperature
  -20°-150°F

DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing this product. The Installation Guide is intended as assistance to reduce setup time. OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please seek professional assistance.
2 YEAR WARRANTY

Documents / Resources

| OPT7 V1 Quantum Rock Lights [pdf] Installation Guide
V1 Quantum Rock Lights, V1, Quantum Rock Lights, Rock Lights, Lights
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>