TRIPLETT BR300 Borescope Inspection Camera User Manual
- June 5, 2024
- TRIPLETT
Table of Contents
TRIPLETT BR300 Borescope Inspection Camera
Introduction
Congratulations on your purchase of the Triplett BR300/BR350 Borescope. The BR300/BR350 is a high-performance industrial inspection camera with a 5-inch high definition color LCD. It is ergonomically designed so that the main function buttons can be controlled with one hand. The built-in 3000mah rechargeable lithium battery allows 3-4 hours of continuous operation. The snapshot and recording functions are supported, photos and videos can be saved on TF memory card (Micro-SD card). The camera focal length is 1.2” to 4.0” (3cm to 10cm). Model BR300 is a single forward-looking camera system and the Model BR350 is a Dual forward and side view camera system.
Meter Description
Safety
This product is designed for industrial inspection camera.
- Avoid severe hits to the camera probe, and do not aggressively pull the cable.
- Please do not use it under high temperature, high magnetic environments or under strong light.
- Please use 5V household charger that meets the safety regulations to charge this device.
- Do not expose this product to extremely low or high temperatures
- If used for extended periods of time, please ensure that it is charged at least once every 3 months to prevent irreparable damage caused by excessive
- battery discharge.
- Do not wipe the unit with corrosive chemical wash.
WARNING
This product is an industrial inspection camera and is not intended for medical use or human examination.
ACCESSORIES INSTALLATION
The installation of accessories is shown in the following figures
Operation
BUTTON OPERATION
Power Button
- Press for 3 seconds to turn ON / OFF the screen.
Playback/Menu Button
- In live view, it functions as the Menu Button. Press to enter the settings menu. Press again to exit.
Playback
- Press and Hold for 3 seconds to enter Photo or Video Playback, press again to exit.
Zoom
- In live view, Press to zoom 3X, press again to resume.
Screen Rotate
- In live view, press it to screen rotate 180°, press again to resume screen rotate 180°.
OK Button
- In setup menu, press the OK button to confirm.
Freeze Screen Button
- In live view , press to freeze screen press again to exit.
Camera LED Button
- Press to control 3 levels brightness.
Auxiliary light switch
- In live view, Press to turn ON LED light . Press again to turn OFF the LED light .
Photo / Video Button
- Press to capture photo images Hold for 3 seconds to Start video recording / End video recording.
ENTER MENU SETTINGS
Date / time settings
Setting path
- Short press the button to enter the settings page Select first item (Date / Time) on settings page
- Press the button to select the Date / Time desired. Press up and down keys to change the Date /Time you desire.
- Press to save the setting.
Language settings
- The default language is English. The system supports English, Chinese, German, French, Spanish, Russian and Japanese.
Setting path:
- Short press the button to enter setting page Select second item (Language) on settings page
- Press up and down keys to select the language desired.
- Press to save the setting.
- TF card format settings Setting path:
- Short press the button to enter setting page
- Select the 3rd. item (format) on settings page
- Press the button to enter format select.
- Press up and down buttons to select the format needed or Cancel.
- Press the to save your setting.
Photo taking / Video recording / Playback
- Press the for 3 seconds to switch to playback mode. Press up and down button to select photo or video to view,Short press the button to enter delete mode of photo or Video.
- Press to confirm deletion of the photo or video.
- Press the for 3 seconds to exit playback mode.
Specifications
| Model | BR300 (Single Camera) BR350 (Dual Camera) |
|---|---|
| Screen | 5.0inch color LCD display |
| Resolution | 1280720 ; 19201080 |
Horizontal viewing
angle
| 60°
Language| Simplified Chinese, Traditional Chinese, English, French, German,
Italy, Russian,
Japanese
Line length| 5M 10M (Interchangeable)
Focal length| 1.2” to 4.0” (3cm-10cm)
Waterproof level| IP67(only for camera head and lens)
Lens diameter| 3.9mm/5.0mm/5.5mm/7mm/8mm
Battery capacity| 3000mAh
Battery life| Approximately 3-4 hours
TROUBLESHOOTING
| Problem | Solution |
|---|---|
| The device does not POWER ON | 1. Use after fully charging the battery. |
2. Confirm whether the power supply has been successfully connected
TF card reading failed| 1. Confirm whether the TF card meets the requirements(the
Highest supported format is 64GB Micro TF card in FAT 32,and the transmission speed must be Class 10 or higher)
2. Remove the TF card and reinsert it.
---|---
After the device is connected to
The PC, TF card not
read.
| 1. Reconnect the device and the PC
2. Confirm whether to enter mass storage mode
Blemishes or smudges
on the screen
| 1. Clean the screen carefully with a soft
cloth
Warranty
Triplett / Jewell Instruments extends the following warranty to the original
purchaser of these goods for use. Triplett warrants to the original purchaser
for use that the products sold by it will be free from defects in workmanship
and material for a period of (1) one year from the date of purchase. This
warranty does not apply to any of our products that have been repaired or
altered by unauthorized persons in any way or purchased from unauthorized
distributors so as, in our sole judgment, to injure their stability or
reliability, or which have been subject to misuse, abuse, misapplication,
negligence, accident or which have had the serial numbers altered, defaced, or
removed. Accessories, including batteries, are not covered by this warrant
copyright © 2021 Triplett
www.triplett.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>