ggm gastro PEKG20 Mini Pizza Oven User Manual

ggm gastro PEKG20 Mini Pizza Oven

Thanks for your using of our company product, in order to ensure the product performance give full play to the role, please have a read of this manual to reduce unnecessary loss and damage, and get a further study of our product characteristic、 installation and operation. Also please keep the manual for further reference.

Control board operating instruction

Operating instruction of the PEKG20 control board.

1. The left switch is for controlling the internal lighting.
2. The right switch is for controlling all the heating elements, turn it on, then the thermostats can be used. The indicator lights turn off when the heating elements reach the set temperature. (If the power switch is “On”, the timer would be out of function. If you need to use the timing function, please first turn off the power switch, by now, the timer is also act as “power switch”.)
3. These two thermostats are separately control the top and bottom heating elements and their indicator lights.

Functions

Functions

1. Heating up quickly. This oven is equipped with 350℃ thermostat, greatly save the cooking time.
2. Equipped with baking stone, which makes the food are heated more evenly. 1.3 Two thermostats separately control the top and bottom heating elements, you can freely adjust the temperature of each heating element.

Application

1. Applicable for baking all the fresh and freeze bread and flour products.
2. Applicable for baking fresh and freeze meat.

Machine illustration diagram

Appearance: Case: Front Panel: Chamber:

Parts list

1

| Bottom rail| 1
5.2| PEKG20-005-00

2

| Left clevis| 1
5.3| PEKG20-005-00

3

| Top clevis| 1
5.4| PEKG20-005-00

4

| Right clevis| 1
5.5| PEKG20-005-00

5

| Left vertical board| 1
5.6| PEKG20-005-00

6

| Top rail| 1
5.7| PEKG20-005-00

7

| Machine control board| 1
6| PEKG20-006| Chamber| 1
6.1| PEKG20-006-00

1

| Baking stone| 1
6.2| PEKG20-006-00

2

| Heating element| 2
6.3| PEKG20-006-00

3

| Left layer board| 1
6.4| PEKG20-006-00

4

| Up strip for the heating element| 1
6.5| PEKG20-006-00

5

| Right layer board 1| 2
6.6| PEKG20-006-00

6

| Right layer board 2| 1
6.7| PEKG20-006-00

7

| Main panel of the chamber| 1
6.8| PEKG20-006-00

8

| Cover board of the chamber| 1
6.9| PEKG20-006-00

9

| Fixed plate for the pyrocotton| 1
6.10| PEKG20-006-01

0

| Lamp shade| 1
7| PEKG20-007| Bottom fixed plate for the pyrocotton| 1
---|---|---|---
8| PEKG20-008| Top fixed plate for the pyrocotton| 1
9| PEKG20-009| Durothermic lamp| 1
10| PEKG20-010| Binding post| 1
11| PEKG20-011| Side board| 2
12| PEKG20-012| Rubber feet| 4
13| PEKG20-013| Shell| 1
14| PEKG20-014| Layer board for the chamber| 1
15| PEKG20-015| PG13.5 cable gland| 1
16| PEKG20-016| Cable| 1
17| PEKG20-017| Timer| 1

Installation instruction

1. All the electrical power unit and circuit connection must be installed by qualified electrician with safety standard.
2. Connection must be based on requirements.
3. Make sure the rubber feet have been installed securely.
4. Product should be place in a well-ventilated place on solid platform, and we suggest to least at least 10cm space between the product and the wall or barriers. Also place the product away from combustible materials, and there should be a fire extinguisher equipped around.
5. Remove the packaging film off the surface.
6. The power wire should be connected according to safety standards. Make sure the voltage and frequency conform to the parameters. And please install a double pole switch before connection. When the voltage working, the voltage error should be under ±10%. (Product must be connected to ground.)
7. Connect the cable to the power supply fixed by using a screwdriver according to the connection diagram, then loosen the screw inside the power point, and plug in the cable, make sure the sheet copper compress the power line tightly. If the connection is incorrect, it may cause joint heating and burning off the power cord.

Operation instruction

Turn on the power supply.

1. The temperature of the oven can be adjusted between 0~350℃.
2. Turn the timer clockwise to the desired time, then the indicator light on and the heating element starts working, when it reaches the set temperature, the indicator light off. If the temperature is below the set temperature, the heating element will be automatically reheated and the indicator light on.
3. The internal lighting can help monitoring the baking process.
4. Cooking time depends on the amount of the food, the more the food had, the longer the time required.
5. Please turn off the power if not using.

Warning

1. If you want to clean、repair or move the machine, please pull out the plug first.
2. Please don’t touch the switch or plug with wet hand.
3. The machine can’t be flushed directly, and please be careful don’t let any water flow into the switch when cleaning.
4. Keep the children from touching or using the machine.
5. The ground wire must be connected, all the connection must be reinstated after maintenance.

Maintenance

1. Please pull out the plug first before maintenance, and clean it after cooling down the chamber.
2. For daily cleaning, you can use a dry cloth to wipe off the grease on the chamber, don’t flush the chamber with water directly. For cleaning the baking stone, please take out the baking stone, use a fur brush to clean its surface, and rinse it with water then dry it. (Don’t use any cleanser to clean the baking stone, because the baking stone can strongly absorb the water, so that the cleanser would be absorbed at the same time, which may affect the flavor of the food.)
3. We suggest maintain the machine by qualified electrician once in a month.

Trouble shooting

Not heating up

| 1.       Please check whether the connection is loose.

2.       Rotate the thermostat to your needed temperature.

3.       Please check whether the power switch is match up with the parameters

4.       Contact the service center for repair suggestion.

Short circuit| Contact the service center for repair suggestion
Internal light Not work| 1.       Pull out the plug, and cool down the chamber.

2.       Replace a new bulb.

Scorching smell appear| ****

Contact the service center to check whether the connection is short out.

Baking unevenly

| Readjust the thermostats for each heating elements to see how they work, If they work well, please contact the service center to check if the Heating element need to change.

Specification

Model

| Temperature range| ****

Dimension(mm)

| Internal dimension(mm)| ****

Voltage(V)

| ****

Power(KW)

---|---|---|---|---|---
PEKG20| 0~350 ℃| 560X570X280| 415X400X120| 220V| 2KW

Wiring diagrams

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>