T-fal IT9500Z1 Expert Precision Garment Steamer Instruction Manual
- June 5, 2024
- T-fal
Table of Contents
IMPORTANT SAFETY INSTRUCTIONS
1800141166-07
IMPORTANT SAFETY INSTRUCTIONS
-
When using your appliance, basic precautions should
always be followed, including the following: -
Read all instructions before using this product.
-
This product has been designed for indoor, domestic use
only. Any commercial use, inappropriate use or failure to
comply with the instructions, the manufacturer accepts
no responsibility and the guarantee will not apply. -
Always plug your appliance:
– into a mains circuit with voltage between 220 V and 240 V.
– into an earthed electrical socket.
Connecting to the wrong voltage may cause irreparable damage to the appliance and will invalidate your guarantee.
If using a mains extension lead, ensure that it is correctly rated (16A) with an earth, and is fully extended. -
Completely unwind the power cord before plugging into an earthed socket.
-
Use appliance for its intended use only.
-
To reduce the risk of contact with hot water emitting from steam vents, check appliance before each use by holding it away from body and operating steam button.
-
For countries subject to marking: This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
-
Never pull on the cord to disconnect the appliance from electrical outlet; instead, grasp plug and pull to disconnect on the plug to disconnect the appliance.
-
Do not allow cord to touch hot surfaces or come into contact with rough or sharp edges. Let the appliance cool completely down before putting away. Loop cord loosely around appliance when storing.
-
Always disconnect appliance from the electrical supply when filling with water or emptying when cleaning, when removing or refitting accessories and when not in use.
-
Care should be taken when using the appliance due to the emission of steam.
-
Do not operate appliance with a damaged cord or if appliance has been dropped or damaged. To avoid the risk of electric shock, do not disassemble or attempt to repair the appliance.Take it to the nearest approved service centre for examination and repair. Incorrect reassembly or repair could cause a risk of fire, electrical shock or injury to persons when the appliance is used.
-
Close supervision is necessary for any appliance being used by or near children.
-
Keep the appliance and its cord out of reach of children less than 8 years of age when it is energized or cooling down.
-
Never leave the appliance unattended when it is connected to the mains. Before storing the appliance, once it is unplugged, please wait until it has cooled down (around 1 hour).
-
Burns could occur from touching hot metal or plastic parts, hot water or steam. Use care when you empty a steam appliance. There may be hot water in the reservoir.
-
If an extension cord is absolutely necessary, a cord with a 16A ampere rating shall be used. A cord rated for less amperage can result in a risk of fire or electric shock due to overheating. Care shall be taken to arrange the cord so that it cannot be pulled or be tripped over.
-
To protect against a risk of electric shock, do not immerse the appliance in water or other liquids.
-
Do not direct steam at people, animals or clothes while they are being worn.
-
For countries where marking is not required: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
-
The use of accessory attachments other than those provided by the manufacturer is not recommended and may result in fire, electric shock or personal injury.
-
The appliance must be rested on a stable surface. When placing the appliance on its base, ensure that the surface on which the base is placed is stable.
-
The appliance must not be used if it has been dropped, if there are visible signs of damage or if it is leaking.
-
Check the electrical power cord for sign and wear or damage prior to use. If the electrical power cord is damaged, it must be replaced at an approved service centre to avoid any danger. •
-
Do not use other descaling products than the one cited in the IFU.
Before first use
- When you first use the appliance, some smoke or a harmless odour may be produced or there may be a small discharge of particles. This will not affect the use of the appliance and will disappear quickly.
What water to use?
- Your appliance has been designed to use tap water.
If your water is very hard, mix 50% tap water and 50% bottled demineralised water.
Never use water containing additives (starch, perfume, aromatic substances, softeners, etc.), or condensation water (for example water from tumble dryers, water from refrigerators, water from air conditioning units, rainwater). This water contains organic waste materials or minerals that concentrate under the effect of heat and cause spitting, brown colouring or premature ageing of your appliance.
SAVE THESE INSTRUCTIONS
TROUBLESHOOTING
Problems | Possible causes | Solutions |
---|---|---|
There is no steam. | The appliance has not been turned on. | Check that the |
appliance has been plugged in correctly. Next press the On/Off pedal, the
power indicator light located at the front of the appliance will come on.
The hose has been obstructed.| Check that the hose is not bent or twisted.
There is no water left in the water tank.| Switch off the device and fill the
water tank.
The steam is not ready yet.| The appliance will produce steam about 45 seconds
after it has been switched on.
The steam flow is low.| Your steamer has a build-up of scale because it has
not been rinsed out regularly.| See descaling process (Cleaning paragraph).
The hose has been obstructed.| Check that the hose is not bent or twisted.
There is no water left in the water tank.| Switch off the appliance and fill
the water tank.
Water runs through the holes of the
steam head.
| There is condensation in the hose.| Never use a steamer in the horizontal
position. Hold the hose vertically outstretched and wait for the condensed
water to return to the steamer.
The steamer takes a long time to heat and/or ejects white particles.| Your
steamer has a build-up of scale because it has not been descaled regularly.|
See descaling process (Cleaning paragraph).
ENVIRONMENTAL PROTECTION FIRST !
Your appliance contains valuable materials which can be recovered or
recycled.
Leave it at a local civic waste collection point.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>