rutec 80710-V2 DALI-2 Dimm-Actor Instruction Manual
- June 9, 2024
- rutec
Table of Contents
rutec 80710-V2 DALI-2 Dimm-Actor
The rutec DALI-2 dimming actor has 4 channels with one address for single- colour controls and enables digital dimming with soft control behaviour. The dali addresses can be addressed manually or automatically. Addressable and visible via digital display.
TECHNICAL DATA
- Article No: 80710-V2
- INPUT: 12/24V
- OUTPUT: 4x5A 4×60/120W
PRODUCT DIMENSIONS
WIRING DIAGRAM
OPERATING INSTRUCTIONS
Manual setting
By pressing any key for a long time, the display will flash, now you can
select the address manually by briefly pressing the keys. Once you have
entered the desired address, this is confirmed by confirmed by pressing and
holding any key again.
Automatic setting
The dali master unit assigns the addresses automatically. The function can be
found in the operating instructions of the master.
Note: As soon as an address has been selected, it is adopted for all 4 channels. This means that all 4 channels have the same address.
SAFETY INSTRUCTIONS
-
Be sure to have a professional electrician complete installation. There is no warranty coverage for any lights installed without observing european safety directives.
The LED controller is not waterproof. Please protect the controller from direct sunlight and avoid rain. For outdoor installation,please ensure that the controller is installed in a waterproof housing. -
Always ensure that the unit is installed in a location with good ventilation to ensure correct operating temperature.
-
Check that the voltage and the power adapter are suitable for the controller and that the designation of the anode and cathodematches those of the controller.
-
Please ensure that an appropriate cable diameter is used for the connection between the controller and the LED.
-
Never connect the cables when the power is on, check that the connections are correct and check for short circuits beforeswitching on the power.
-
Please do not carry out any repairs yourself. This will invalidate the manufacturer’s warranty.
rutec Licht GmbH & Co. KG
Carl-Zeiss-Str. 15 | 28857 Syke
Tel. (0 42 42) 95 65-0 | Fax (0 42 42) 95 65-25
E-Mail: info@rutec.de
http://[www.rutec.de](http://www.rutec.de)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>