rutec ALU57345UWWD Downlight Dimmable Set-Single Plug and Play Instruction Manual
- June 5, 2024
- rutec
Table of Contents
rutec ALU57345UWWD Downlight Dimmable Set-Single Plug and Play
Danger of electrocution!
Be sure to have a professional electrician complete the installation. There is no warranty coverage for any lamps installed without observing European safety directives.
Fire hazard!
Do not cover lamps with heat-insulating materials.
Caution!
- Only the supplied low voltage cable must be used for all connec-tions on the secondary side of the converter.
- The Downlight is suitable for mounting on normally flammable surfaces such as wood and particle board materials which are more than 2 mm thick. Only install downlights so that they shine downwards.
Installation of mounting springs
Make sure that the springs are in the right position
Installation
Only operate the protection class III recessed downlight TALU Plug & Play with the constant Current converter provided for it (including in delivery). CE compliant with the applicable European directives.
Assembly
Stromschlaggefahr!
Switch off voltage prior to installation. Ensure that voltage cannot be accidentally switched on again.
- Saw a hole at the installation location. The diameter is 68 mm.
- Electrical connection
- Connect the TALU Plug & Play recessed downlight to the secondary sideline of the converter using the connector supplied with the matching counterpart of the connector. Connect the existing 230V AC mains voltage to the primary side of the converter
- Press the springs together and place the downlight in the sawn-out hole (fig. 3).
- Switch on the mains voltage.
Read User Manual Online (PDF format)
Loading......