Tenda AC7 AC1200 Smart Dual-Band WiFi Router Installation Guide
- June 4, 2024
- Tenda
Table of Contents
AC7 AC1200 Smart Dual-Band WiFi Router
Installation Guide
For product or function details, please go to
www.tendacn.com to download the user guide.
AC1200 Smart Dual-Band WiFi Router Model: AC?
Package contents
- Wireless router 1
- Power adapter 1
- Ethernet cable 1
- Quick installation guide 1
http://download.cloud.tenda.com.cn/down/app
Scan to download the Tenda WiFiapp, or get it on Google Play/App Store.
If any item is incorrect, missing, or damaged, please keep the original package and contact the local reseller or distributor immediately.
Install the router
If you want to replace your original router connected to the internet with a PPPoE username and password, start from Step 1. Otherwise, start from Step 2.
Step 1:Migrate your PPPoE user name and password from your original router
- Power on your original and new routers.
- Connect the WAN port of the original router to ports 1, 2, or 3/IPTV of the new router using an Ethernet cable.
- Wait about 6 seconds (When the WAN, and LAN indicators of the new router turn solid on after blinking fast, your migration is successful).
- Remove the original router.
Step 2: Connect to the internet
- Power off your modem, and remove its battery (if any).
- Connect the WAN port of the new router to the LAN port of your modem using an Ethernet cable.
- Reinstall your modem’s battery, then power on your modem and the new router.
Tip: If you access the internet through the Ethernet jack, connect the WAN port of the router to the Ethernet jack using an Ethernet cable.
Connect devices-
Connect your wireless devices to the router using the SSID and WiFi password labeled on the bottom/front of the router.
Connect your wired devices to ports 1, 2 or 3/IPTVof the router using Ethernet cables. The LAN indicator fast blinks twice.
Set up you router
-
Start a web browser on a device that has connected to the router. Entertendawifi.com in the address bar, and press Enter.
-
Click Start. (If the following page does not appear, refer to Q1in the FAQ.)
-
Confirm or set the related parameters. Then click Next.
( PPPoE is used as an example here.)
-
Set your wifi name (SSID), WiFi password, and login password.
Then click Next.
Note: The WiFi password is used to connect to the WiFi network of the router, and the login password is used to log in to the web UI to manage the router.
Reconnect your wireless devices to the router’s WiFi network using
the WiFi names and the WiFi password you set. The wired devices can access the
internet directly if they have connected to ports 1, 2, or 3/1 PTV.
Tip: If the internet is still inaccessible after the configuration, please refer to Q2in the FAQ.
| LED indicator | Status | Description |
|---|---|---|
| SYS | Solid on | •The router is starting. |
•If the indicator is still solid on after your router completes startup, it
indicates that the system is faulty.
Slow blinking| The router is working properly.
WAN| Solid on| The WAN port is connected properly.
Fast blinking| Data is being transmitted over the WAN port.
Off| The WAN port is disconnected or connected improperly.
LAN| Solid on| Port 1, 2, or 3/IPTV is connected properly.
Fast blinking twice| A new device is connected to ports 1, 2, or 3/IPTV.
Off| None of ports 1, 2, and 3/IPTV is connected or connected properly.
WiFi| Solid on| At least the 2.4 GHz or 5 GHz WiFi network is enabled.
Fast blinking| Data is being transmitted wirelessly.
Slow blinking| The router is performing WPS negotiation.
Off| The WiFi network is disabled.
Port/Button| Description
---|---
POWER| Used to connect to the power adapter included in the package.
WIFI| Press the button once to enable/disable the WiFi network of the router.
RST/WPS| Used to start the WPS negotiation process, or to reset the router.
WPS: Press the button of the router, and enable the WPS function of another
device within 2 minutes to establish a WPS connection.
•Reset: When the SYS indicator blinks, hold the button down for about 8
seconds. The router is reset successfully when all the LED indicators blink
once.
WAN| Used to connect the router to the internet.
1/2| They are LAN ports used to connect to wired devices such as computers or
switches.
3/IPTV| •It is a default LAN port.
•But if the IPTV function of the router is enabled, it serves only as an IPTV
port used to connect to a set-top box.
FAQ
Ql: I cannot log in to the web UI of the router after entering tendawifi.com, what should I do?****
A 1 : Try the following solutions and log in again:
– Ensure that your Ethernet cable with internet connectivity is plugged into
the WAN port of the router rather than a LAN port.
– Ensure that your wireless device is connected to the router’s SSID.
– Ensure that your wired device is connected properly to ports 1, 2, or 3/IPTV
of the router by Ethernet cable. The device is also set to Obtain an IP
address automatically and Obtain a DNS server address automatically.
– Ensure that tendawifi.com is entered correctly, or try logging by
192.168.0.1.
– Replace the web browser.
– Reset the router and log in again.
Q2: I cannot access the internet after the configuration, what should I do?****
A2: Log in to the web U I of the router, and check your router’s connection
status on the Internet Status page.
If your router is connected to the internet successfully as in the figure is
shown below, try the following solutions:
Connect your wireless devices to the WiFi network of the router using the new
WiFi name and password you set.
• If the Connection failed appears on the page:
-Click Internet Settings on the web UI to check whether the connection type and parameters you entered are correct. Connection type
Information provided by your ISP
PPPoE
ISP user name and ISP password
Dynamic IP address
None
Static IP address
IP address, subnet mask, gateway, DNS server, and other parameters
– Connect the Ethernet cable with internet connectivity to your computer.
• If your computer cannot access the internet, consult your ISP.
• Otherwise, reconnect the Ethernet cable with internet connectivity to your
router, reset your router and configure it again.
Q3: How to reset the router?****
A3: When the SYS indicator blinks, hold down the RST/WPS button for about 8 seconds. The router is reset successfully when all the LED indicators blink once.
CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures.
Operations in the 5.15-5.25GHz band are restricted to indoor use only.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator & your body.
The mains plug is used as a disconnect device, the disconnect device shall
remain readily operable.
NOTE: (1 )The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. (2) To
avoid unnecessary radiation interference, it is recommended to use a shielded
RJ45 cable.
Declaration of Conformity
Hereby, SHENZHEN TENDA TECHNOLOGY CO., LTD. declares that the radio equipment
type AC7 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address:
http://www.tendacn.com/en/service/download-cata-101.html
Operate Frequency:
2.4G: EU/ 2400-2483.5 MHz (CH1-CH13)
5G: EU/5150-5250 MHz (CH36-CH48)
EIRP Power (Max.):
2.4 GHz: 19.86 dBm
5 GHz: 22.96 dBm
Software Version: Vl 5.03.06.XX
Caution
Adapter Model: BN052-A09009E/BN052-A09009B
Manufacturer: SHENZHEN HEWEISHUN NETWORK TECHNOLOGY CO., LTD.
Input: 100-240 V AC, 50/60 Hz, 0.3 A
Output: 9V 1.0 A
: DC Voltage
FCC Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device is for indoor use only.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part15 of the FCC RF Rules.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator & your body.
Caution:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
NOTE: (1) The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. (2) To
avoid unnecessary radiation interference, it is recommended to use a shielded
RJ4S cable.| BE| BG| CZ| DK| DE| EE| IE| EL| ES| FR| HR| IT| CY| LV
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
LT| LU| HU| MT| NL| AT| PL| PT| RO| SI| SK| Fl| SE| UK
Operating Temperature: 0 °C-40C
Operating Humidity: (10%- 90%) RH, non-condensing
–
RECYCLING
This product bears the selective sorting symbol for Waste electrical and
electronic equipment (WEEE). This means that this product must be handled
pursuant to European directive 2012/19/EU in order to be recycled or
dismantled to minimize its impact on the environment.
The user has the choice to give his product to a competent recycling
organization or to the retailer when he buys new electrical or electronic
equipment.
Copyright© 2018 Shenzhen Tenda Technology Co., Ltd. All rights reserved.
Tenda is a registered trademark legally held by Shenzhen Tenda Technology Co.,
Ltd. Other brand and product names mentioned herein are trademarks or
registered trademarks of their respective holders. Specifications are subject
to change without notice.
Technical Support
Shenzhen Tenda Technology Co., Ltd.
6-8Floor, Tower E3, NO.1001, Zhongshanyuan Road, Nanshan District,
Shenzhen, China. 518052
USA hotline: 1-800-570-5892
Canada hotline : 1-888-998-8966
Website: http://www.tendaus.com
Email: support.usa@tenda.com.cn
Hong Kong Hotline: 00852-81931998
Website: http://www.tendacn.com
E-mail: support@tenda.com.cn
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>